Re-fencing a horse arena, but instead of using treated softwood which will only last 5 minutes, going to use oak. Getting some 2.4m 10"x5" greenoak sleepers and will cut them down to create three 3"x5" posts from each. Works out about a pound more per post than softwood.
Questions is what point to put on to give the best accuracy when driving them in with a protech post rammer?
Cut a point on 2 sides or 4?
Sharp or relatively blunt?
Questions is what point to put on to give the best accuracy when driving them in with a protech post rammer?
Cut a point on 2 sides or 4?
Sharp or relatively blunt?