As long as you just top up that oil leak your okBorderline engineering as used a mag drill but I promise not to paint it.
Ford sideplates and Claas front piece onto NH 8340 to fit Farm Farce front linkage on.
View attachment 906375
View attachment 906374
i shall be using that a lotbut I promise not to paint it.
Shiny through useCannot take that
them adjuster bal spanners are far too shiny
And defo needs a gass axe in picture
Shiny through use
View attachment 906791
If your welder has a chain holding the gas cylinder on, put a couple gurt big bolts in , stop it unhitching, toppling of as you try to get the welder up a step and knocking the stem off the regulator so you have to drive to boc when you don't need gas
I like to think I've been through most solutions to any problems I have,but that hadn't crossed my mindJust weld the bottle to the welder
Grinder... check. Hammers... check. Big stilsons... check. Good work.Quick fix from the nettles
what is the handle made out of,is it steel.....................................Tired of batteries without handles? This simple bodge will end your troubles:-View attachment 898253
Ideal for winter, makes a hand warmer.what is the handle made out of,is it steel.....................................
Alternative is tek screw the bottle to the chain and welderI like to think I've been through most solutions to any problems I have,but that hadn't crossed my mind
Must try harder in the future, if its survivable twood be worth it to see the look on Glyn's face when I changed the bottle............
Alternative is tek screw the bottle to the chain and welder