scrubbuster
Member
- Location
- Easter Ross
I will be baling hay for the first time with the 945. I always rowed up for the old 370 with the haybob. Will I stick with the haybob and then travel a bit faster or should I get a rake in?
TIA
TIA
Best bout for NH 945
- Thread starter scrubbuster
- Start date
Spudie
Member
- Location
- Ards C.Down
I bale mostly behind a rake brought in to 20ft
Timbo
Member
- Location
- Gods County
With a 940 we rake with a Kuhn 7501, so fair sized rows. Dense and consistent rows make the best bales.
scrubbuster
Member
- Location
- Easter Ross
Thanks. I expected that to be the answer. I know haybobs are not popular on here but I quite like the bouts as they do more drying as the day goes on compared to raked ones, which is always a help up here. If it's not going to make as good bales I will arrange a rake. I could always do a bit of each and see
Timbo
Member
- Location
- Gods County
If you are using any form of sledge behind it, ya rows wont be wide enough to fit down using a haybob
scrubbuster
Member
- Location
- Easter Ross
I always managed with a flat 8 on the 370. Will the 945 be too wide?
I found the 945 a bit awkward sometimes with narrow rows and flat 8 packs. It was improved by fitting a hydraulic ram on the drawbar and using a hay Bob with side delivery.
- Tags
- baling baling hay kuhn