AnyOldName
Member
- Location
- The Motor City
Who knows with these idiots
New Theory: Did he have it in 1000rpm and it started to take off like a helicopter? What’s the pitch angle on those blades??
Wreckers!!
- Thread starter Kevtherev
- Start date
New Theory: Did he have it in 1000rpm and it started to take off like a helicopter? What’s the pitch angle on those blades??
Looks to me like it tipped while folded up and went all the way round and righted itself by the pto
To be hoped cameraman had a good zoom on his camera and was stood further back than he lookedNot a wrecker but something would be if it came asunder
Homemade Farm Equipment | Facebook
A group for people who love homebuilt and modified farm tractors and equipment. Please feel free to share what you have built and ask questions if you are building something.www.facebook.com
Dman2
Member
- Location
- Durham, UK
It looks feckin lethal!
ridger
Member
- Location
- Tyrone, Northern Ireland
That person should design a topper that doesn't break the shearboltNot a wrecker but something would be if it came asunderHomemade Farm Equipment | Facebook
A group for people who love homebuilt and modified farm tractors and equipment. Please feel free to share what you have built and ask questions if you are building something.
or turn cartwheels.
last time they send the aerobatic team to cut the grass I expect?
RushesToo
Member
- Location
- Fingringhoe
@Phil P Are you naturally a calm man, or was blood spilt?@ED.D as I was saying about them not breaking it!
View attachment 972736View attachment 972737View attachment 972738
Personally [not proud of this] I would love to read the transcript of the question and answer session that allows the forensic analysis of how this happened, what went wrong, the awareness of the pilot of this event and who is to blame.
Can we all pitch in with questions that we would like you to ask "on behalf of the insurance company" ?
- Location
- North West
The problem is, they have a no blame policy
. So as long as the operator (and I use this term very loosely!) admits responsibility for damaging something there is no punishment or investigation as long as no one is injured that is. It’s crazy but if every time something got damaged they sacked someone they’d have no staff in a week 
. In fact the punishments is far greater for driving to fast on the apron (where the planes are parked) or failing a drugs and alcohol test.
- Location
- South Molton
I've seen a twin rotor rake tipped,admittedly it wasn't very level.
Lower side came up, then the higher side as the lower side latched in. This caused the whole machine to rotate 45 degrees and end up sat on the floor with the transport wheels pointing up the hill.
Saving grace? It was the boss that was driving!
- Location
- North West Wales
Not a wrecker but something would be if it came asunderHomemade Farm Equipment | Facebook
A group for people who love homebuilt and modified farm tractors and equipment. Please feel free to share what you have built and ask questions if you are building something.
Jesus wept! Wouldn’t like to do a sharp right hand turn with that bitch running.
It's OK, he's got a protective rubber shield stuck to the roll frame which should deflect the blades.Jesus wept! Wouldn’t like to do a sharp right hand turn with that bitch running.
Poor PTO clutch.
bobajob
Member
- Location
- Sw Scotland
Geez I think you would trade the tractor in for a new one!!
- Location
- North West
betweenthelines
Member
- Location
- southwest
Dear TFF, what should I do? Just bought a s/h tractor off a dealer, sight unseen as he said it was mechanically perfect, when it was delivered the cab is full of shyte..................
Deerefarmer
Member
- Location
- USA
I know a farm bought a new t7060 or something newholland and flooded the cab with slurry in the first month... gave it a thorough cleaning but still suffered electrical glitches with the buttons after that