Which tool for min till
- Thread starter Dman2
- Start date
- Location
- North West
PM’d you
Don't be shy PhilPM’d you
I’d really like to try one only need spring release.
Lot's of expensive heavy metal mentioned so far.
Won't Moore type drills work on heavy ground ?
If I give up the plough, I only want one implement to replace plough/ PH / air drill.
Won't Moore type drills work on heavy ground ?
If I give up the plough, I only want one implement to replace plough/ PH / air drill.
I'm guessing 15 grandPM’d you
alomy75
Member
You can only plough blackgrass down once. A plough is useful against blackgrass but only once every few years.
Dman2
Member
- Location
- Durham, UK
thats what I have
Dman2
Member
- Location
- Durham, UK
Mans land stops being hard to work if you don`t compact it
With 150hp, decent set of discs and subsoil when necessary but do it early and spray off before drilling.
Dman2
Member
- Location
- Durham, UK
Intend having a word with him at Yams
Dman2
Member
- Location
- Durham, UK
Main reason for looking is for the new SFI scheme thats coming out ( think thats what it`s called)
You need to min till a certain % of land
Payment should cover cost of SH machine
May even be tempted by a SH Simtech drill
Oh and tax bill was far to high this year
You need to min till a certain % of land
Payment should cover cost of SH machine
May even be tempted by a SH Simtech drill
Oh and tax bill was far to high this year
I phoned. He didn’t do spring release. Grange machinery do @ £15kish for a 3m!?
- Location
- Limousin/Charentes toad land
Nearly
Member
- Location
- North of York
I'll just subsoil and go.Main reason for looking is for the new SFI scheme thats coming out ( think thats what it`s called)
You need to min till a certain % of land
Payment should cover cost of SH machine
May even be tempted by a SH Simtech drill
Oh and tax bill was far to high this year
This year did half like this and half ploughed.
Results at harvest. Looks the same now.
I've direct drill here if anyone asks I did some with that.
- Location
- North West
.
- Location
- Moreton-in-Marsh, Glos
Post 37?
- Location
- Darlington
I have been looking at the Simtech since I saw one at Groundswell, I've applied for the grant, will wait and see if I get it.Main reason for looking is for the new SFI scheme thats coming out ( think thats what it`s called)
You need to min till a certain % of land
Payment should cover cost of SH machine
May even be tempted by a SH Simtech drill
Oh and tax bill was far to high this year
lloyd
Member
- Location
- Herefordshire
I bought a sh 2018 dalbo 300 supermax last autumn it has
done a very good job but it is very heavy as it has double ring
rollers .Its been pulled with a MF7726 and you wouldn't want
anything much lighter on it.
done a very good job but it is very heavy as it has double ring
rollers .Its been pulled with a MF7726 and you wouldn't want
anything much lighter on it.