- Location
- Moreton-in-Marsh, Glos
Beg your pardon Adam.*adam.
yes I think it will be fine especially if drilled early in good conditions.
Thanks.
Now edited.
Last edited:
Beg your pardon Adam.*adam.
yes I think it will be fine especially if drilled early in good conditions.
In reference to the pre em thing. I think niab are saying that in these situation efficacy is reduced, but the other stuff such as no disturbance and mulches brings it back to the same or above the efficacy of it was a lovely seedbed.Beg your pardon Adam. Thanks.
The Winter Barley field I was combining yesterday was conventionally drilled Bazooka
This is what it was yielding
View attachment 1049155
Today we were in a Direct drilled rather hilly field. We don’t attempt to unload on the move on this field.
View attachment 1049154
As it is dangerous to do so.
The difference between this and the last field apart from the drilling technique is that the straw was maybe 6” shorter.
But look at the yield
View attachment 1049153
And then tell me that Direct drilling yields are lower!
Yes, I do know Duncan J. I’ve seen him and his Combine fitted with a stripper header. It works very well until the ground is too wet so that the stripper header tugs the entire plant out of the ground, including the roots plus soil.I see they are cutting winter linseed down by shipston it’s all in row and they do DD drilling chopped linseed straw will wrap around anything .
I don’t know if you know Duncan J he stripper heads all his linseed then drill’s straight into it standing Like I use to.
It is so fit this year, Combining just the once will be fine.Can leave the stuff in swaths, and put it through the combine again with a pickup header to get the last bits out, and then chop the straw....
The reasons it pulls out of the ground is the front rotor is not going fast enough ( I use to hire out stripper heads )Yes, I do know Duncan J. I’ve seen him and his Combine fitted with a stripper header. It works very well until the ground is too wet so that the stripper header tugs the entire plant out of the ground, including the roots plus soil.
Then it’s not long before there is a Combine fire!
I’ve known Duncan having to get a Conventional straw walker and header Combine in to harvest in such conditions.
When conditions are good, his stripper header on his Rotary Class Lexion is very fast.
But harvesting with my conventional combine and header is also very (but not quite so) fast. You need to keep the drum full to get it to thresh properly
The secret with the Weaving GD, it that its discs will drill into extremely trashy conditions. I’m reasonably certain it would cope as @ajd132 suggests.
It’s a shame you stopped hiring out stripper headers. I’d certainly have hired one from you.The reasons it pulls out of the ground is the front rotor is not going fast enough ( I use to hire out stripper heads )
It is so fit this year, Combining just the once will be fine.
Is ther no one with a straw burning boiler who would want itPlease can I ask your advice and opinion on something Adam?
Having finished the W Barley today, my harvest helper Steve, who is me, but a 10 year older retired version and Expert on growing and harvesting Linseed, says my W Linseed is fit and we should start combining it tomorrow.
Like Rape. It can be too dry and he reckons the ideal time to start is now.
Last year we tried chopping the straw which wasn’t actually difficult, but it end up looking like a 3’ mat of cotton wool on the surface. A friend of a friend recommended that we get a straw merchant to bale it and he would sell it to a Power station, but we received no money. I was ok with that and he cleared it very quickly.
However, he doesn’t want it this year because, believe it or not, the Power stations still have a hell of a lot of last year’s straw to use and one of them is broken down anyway.
If any other straw merchants are interested such as @Derrick Hughes or @puntabrava, they can have it this year for free. I can bale it in up 5’ rounds if necessary or could get a large square bale contractor in. Obviously, the baling won’t be for free and there would be a nominal loading charge, but the straw itself would be free.
My question to you @ajd132 , @Warnesworth or anybody else is: You know we use an Angled Disc type Weaving GD drill.
Do you think I could successfully establish a Wheat crop in September into that chopped Linseed straw?
I’m fairly certain that I can get the penetration to drill the seed, but am slightly concerned about hair pinning
There may be some advantages with weed suppression under that cotton wool mat. However, there may be a disadvantages on Pre-ems not working. I’d also be interested in your thoughts on this point @ollie989898 please.
Alternatively. I could bale it, without net and burn it. But in this day and age, the thought horrifies me to waste all that unused energy into the atmosphere.
Heard that it burns too hot for themIs ther no one with a straw burning boiler who would want it
How much u cutting with it? Do u find it reliable?It’s a 2007 and I bought it in 2015. Need a bigger one really as it’s on its limit but will have to manage for another year or two.
What do u mean by shales? Is that stonier type ground?Exactly the same here on our shales.
Shame, really - a couple of months ago yields were looking promising, prices good and financial returns exciting.
Nothing for it but have to to cancel the new combine yet again.
Too much, yesHow much u cutting with it? Do u find it reliable?