benferg's latest activity
-
If its old fuel, has probably gone stale, drain tank and carb, new fuel,try again! -
Stale fuel or lack of choke.
-
They look like comet pump valves. Springs have always been weak in them. I change mine every year, easy to do. I left them for two years...
-
They will function in a poor state, especially with a head of water from tank above. Problems usually arise either when sprayer won't...
-
benferg replied to the thread Square bale wrapper for 4x3 bales.All bales are weighed on the truck carting it and product is DM tested by an Independant company. we run a fusion 3 and a v660 McHale...
-
benferg reacted to IOW91's post in the thread Hedge cutters so you don't have to turn your neck so much? with
Like.
I've thought of these before, look alot easier on the neck. You could always try and adapt your current cutter.... Find a nice sized... -
benferg reacted to KB6930's post in the thread Hedge cutters so you don't have to turn your neck so much? with Like.
There's a man round here with a serious neck problem that runs one on his front linkage so no turning his neck problems
-
benferg reacted to Pistonbroke's post in the thread Hedge cutters so you don't have to turn your neck so much? with Like.
This is the way forward ( or backward 🤣)
-
benferg reacted to McD's post in the thread Why are so many contractors in Lancashire packing up with Like.
Contractors are giving up all over the country. Machinery is ridiculously expensive, good staff are hard to come by and therefore are...
-
benferg reacted to Speedstar's post in the thread Fendt 724, heavy rear mounted implement. with Like.
Looking at there photo is there 2 ton on the front of the fendt now ? I would say you want to move the weights forward on the frame 6 to...
-
The new Holland managed packomat with all weights that's currently on stone fork. It was sometimes a challenge, but fine most of the...
-
Never do anything when it is too wet wait till it is dryer this is even the case with cultivating
-
Err, the Horsch single disc is pretty much the same design as the John Deere one from years ago & the many, many copies of it ever since...
-
benferg reacted to Chezza's post in the thread Spraying in 21m tramlines with a 24m boom. with Like.
Get 6 nozzles that you don’t use/worn out ant put some superglue over the inlet hole to the nozzle
-
Nozzle blanking caps but sure I took nozzle out cap one year and blanked with a 5pence just to get going .