-
-
GGFA replied to the thread Clutch going?.Sounds like you had selected 2 gears at once.gear selector worn is it a gear stick straight ontop of gearbox does it feel slack
-
GGFA replied to the thread Help Buying A Valtra Tractor.
-
-
GGFA replied to the thread Fendt cargo 5x loader.Just standard 1/2 inch couplers on any I've used. To release the pressure put blue spool in float then press button on joystick for...
-
GGFA replied to the thread Fendt error codes.Right hand side of engine nearest the cab there is a bango bolt screwed in through fuelpipes into the block there is a pressure relief...
-
GGFA replied to the thread 36 foot low loader.At 36 foot tri axle would be better for stability and would still have weight on drawbar or if you go for air suspension could have a...
-
Gquote from the great late sir winston churchill ?? ,but you will still have the wrong brand!!
-
GGFA replied to the thread Massey 3080 Front Axle.Did you check the couplers on the 4wd shaft for worn splines when you took it off if the noise has stopped with it removed u could be...
-
GGFA replied to the thread MF 3075 spools and steering won't work.Yes it's strange it stopped driving. I'm pretty sure I remember being at a 3000 series once that had a wet clutch assumed there was...
-
GGFA replied to the thread MF 3075 spools and steering won't work.I'd take the speed sensor out and make sure the gear hasn't sheared off the pump don't want it getting jammed in anything if you tow it.
-
GGFA replied to the thread Fendt 516 profi plus speed input.Theres a sequence to get it to save correct wheel size or it just reverts back to previous setting i remember having issues getting it...
-
GGFA replied to the thread Fendt 516 profi plus speed input.Are you definitely getting the 100 meter calibrated and saved been a while since I done one but took me a while to get the sequence...
-
GGFA replied to the thread Fendt 516 profi plus speed input.There is a wire for wheel or radar in the plug so Depends how your impliment is wired tells you in the book somewhere which pin does...
-
GGFA replied to the thread Fendt 722 S4 Vario hitch dampening oscillations.Have you got the stabiliers in the correct hole for the machine . If the stabiliers are going too tight when lifted to full height this...
-
GBout the only 650 that is nearly 650 is trelleborghs, and we all know what happens to them :facepalm:
-
-
Loading…
-
Loading…
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk