GFA's latest activity
-
GGFA replied to the thread Fendt 722 S4 Vario hitch dampening oscillations.Have you got the stabiliers in the correct hole for the machine . If the stabiliers are going too tight when lifted to full height this...
-
GBout the only 650 that is nearly 650 is trelleborghs, and we all know what happens to them :facepalm:
-
GGFA replied to the thread Reekie ridger.Scanstone would be worth asking depending on age will be same shape board's
-
GGot a Isobus plug on it today. 👍
-
GGFA replied to the thread Trelleborg tyres very disappointed.Had another 540 65 30 trelleborg crack behind the lugs the other day had the same problem few years ago on another tractor rep said...
-
GBut he’ll only need one plug for the control box as opposed to an Anderson connector and then 2 Anderson leads and the time to wire them...
-
GGFA replied to the thread Amatron 3 power source..You can buy the isobus plugs that fit into the socket on your tractor and just fit onto the power supply for the control box. I have...
-
-
GGFA replied to the thread Amatron 3 power source..Plug it into the isobus socket. That way you can swap it to any tractor with ease. Have used Anderson sockets in the past after a while...
-
GGFA replied to the thread Loading and transporting bales.
-
-
GThe ones on my 900 series often have 5 ton of spreader swinging on them and not had issues. Ability to move from cat 2 to 3 by moving a...
-
GGFA replied to the thread Fendt stabilisers.What year is your 716 upto 2011 I think will be smaller pin diameters than a 720. If its the threaded ends thats worn you can buy...
-
GValid point. Although I'd hate to revert back to that. Having grown up operating fully mechanical tractors with gear sticks and...
-
GGFA replied to the thread Tractor/trailer brakes..I had this issue. If you adjusted load sensing on trailer to get them to work correctly on new tractor it was unusable on older tractor...
-
GGFA replied to the thread Fendt error code.Open the flap in the floor and you will see the hex where the manual drive lever goes onto the control motor spray this with wd40 and...
-
GGFA replied to the thread 2006 fendt 818..Can you re activate cruise when it drops out or does a symbol come up on dash .Try holding the clutch pedal up with your foot if this...
