H
horace
Member From shropshire
- Joined
Latest activity Postings About
-
-
Hhorace replied to the thread Which 56 bale carrier.As a kid I used a Russell with no spike and a farmhand with one. Back square into the stack with the spike brushing the ground, then...
-
Hhorace replied to the thread How can you tell if a tractor is power beyond or not ?.TM might not have the fittings connected, but it will be ready to go otherwise.
-
Hhorace reacted to Clive's post in the thread Farmers earn more from YouTube than their crops with
Like.
just depends which parts of it you frequent. This thread is probably never going to be full of what a youtuber wants to read about... -
Hhorace replied to the thread New holland tm190.Do you know it's history? Master cylinders should have been changed to prevent air ingress. Oil pick up in a different place on the new...
-
Hhorace replied to the thread Calibration of t7.200 power command.It's when they are parked up for a long time, they can lose the calibration of a range or direction. So handy to know that you can get...
-
Hhorace replied to the thread Calibration of t7.200 power command.It's not a measurement of the engine coolant temperature, it's the hydraulic oil temperature. It will calibrate if it's below 10 degrees...
-
Hhorace replied to the thread Buckraking charges.It was £5ac in the mid to late 90's with a 5150/MX135 with 16 tines on the back!!!!!!
-
Hhorace replied to the thread Grain bucket size.4.4cu/m on a Tm420s. 3t + of wheat, 1025kg empty. Plays with it.
-
Hhorace replied to the thread Draft control and ploughing..Sounds like you aren't too far wrong. 40 were just a position/draft mixer that was carp in comparison to Tm and newer. Set the depth on...
-
Hhorace replied to the thread Draft control and ploughing..Position control on the slider, draft control on the wheel. Set the depth on the wheel with the slider all the way forward. If you want...
-
Hhorace replied to the thread Fendt 728 gen 7.1986 where my father worked, 6 furrow dp7, fixed at 16 inch furrows and a standard TW15 (132hp) played with it. Plenty of hills and...
-
Hhorace replied to the thread Draft control and ploughing..If your blue one comes from the CNH stable and is Tm or younger it's set wrong.
-
Hhorace replied to the thread Draft control and ploughing..It's got nothing to do with power and traction. The linkage moves independently from the tractor, hence keeping a constant depth. What...
-
Hhorace replied to the thread Draft control and ploughing..Why are most people thinking that draft control will pull the implement out of the ground. It's designed to keep the implement in the...
-
Hhorace replied to the thread Accord drill.Every Accord drill I have ever used is 85 turns of the meter for 1/10th of a hectare, irrespective of drill width. As others have said...
-
-
Loading…
-
Loading…