P

Pmoore

Member 75
Joined
Last seen
Messages
36
Reaction score
16
Points
8

Latest activity Postings About

    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      I'm expecting a similar bill for a new rod.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      Just dirt and the remains of the outer sealing 'o' ring. The rod is bent slightly and scored. I pushed out a bit and it freed a lot...
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      It's tight going back in as well.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      It's tight
      • 20240729_104032.jpg
      • 20240729_103958.jpg
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      Still only at the opening stage. The gland nut is the one with 2 holes for the tool that has the seals for the shaft. I don't expect...
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      I agree. Loctite would have been tight at start and then free. I don't have oxy burning gear but do have a big roofing torch. I have...
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      Was thinking of trying that tomorrow if I can get it to go back in.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      Maybe 10 turns. Past the thin sealing ring on the outside of the gland nut.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      None of the above. It came half way out
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      None of the above. It came half way out.
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      I got it half way out before it seized completely. Now a 3ft bar won't move it. I'm assuming that the threads are galled but maybe it...
    • P
      Pmoore replied to the thread Jcb3cx jack ram.
      I have another problem. I was trying to change the seals in the big ram on one side of tge front loader. Gland nut is very tight snd...
    Show older items
  • Loading…
  • Loading…

The London Palladium event “BPR Seminar”

Dec 05
  • 15,003
  • 234
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

BPR Summit | LW Theatres

lwtheatres.co.uk lwtheatres.co.uk
News
Continue…
Back
Top