As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
Hi,
I’m after some help, just had our drill controls upgraded to a muller isobus system. Works great on our isobus screens except the case Puma pro 700 screen. I’m getting this message on the screen. Has anyone got any ideas. Is this a case problem or a muller problem? Tia
Thanks for the links. They are the sort of thing I’m looking for.
Yeh I figured that they wouldn’t be the cheapest even though they are offering to swap everything over for you.
It can’t be that hard to set it up?
I think up to £500 - £600 pound would be a sensible price range. I looked on the gatekeeper website at their suggested laptop and nearly fell over at the price!! £££[emoji102]
Hi, looking at getting a laptop to replace our old secondary computer that is still currently running gatekeeper.
The old computer is getting pretty slow and also is still on windows 7 which isn’t being supported by Microsoft anymore.
Looking at a laptop as a don’t live at the same yard as the...
I believe they don’t exist anymore. I think Chief are the ones to go to now regarding the Law Denis. I’ll give them a ring if I need any more info. Now I’ve got that page I should be ok. I know the dryer pretty well otherwise.
Been running it at 105 degrees all day and seems to be going...
Thanks that is just what I’m looking for! I would say we have the same machine. We did also have trouble with the burner a few years back and ended up replacing the burner control panel.
This is the current state of my version of that page!
Thanks, the majority is 17% with the wettest being 19%. I did the feed barley at 95 degrees, which I did think was a bit keen but flew through without a problem.
As the title suggests I’m after some advice. Been running a Law Dennis 20t continuous grain fryer for a few years now. It’s great but I can never remember year on year the temperature setting precisely to get the best out of it. Usually I refer to the manual but I’ve had a bit of a mishap with...
One pass with Simba heavy discs as soon as after straw is cleared/muck applied. Then let weather, spray off and drill. Only plough as a reset on bad black grass infested area. So I guess mintill, would be to deep with discs for scratch till.
Yes and it’s in a slot through the chassis so you can’t get to it any other way. We ended up cutting it out from the bottom and then making a tool to fit the head from underneath. 5 minute job turned into 3 hours very quickly!
We've been growing winter naked oats for the past 10 years, and have grown some spring naked oats on occasion. Have always found if you round up them off before harvest the straw breaks up better through the chopper but we tend to bale most of it now as we find is a great feed. Local dairy...
What accuracy of gps did you run this on? Egnos/rtx/rtk? Also did you still run the LH5000 monitor along side this or was it all integrated to the Trimble?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.