I ordered elsewhere , but returned them when invoice arrived. I notice they are about half the price on APH website.
NH combine dividers.
- Thread starter balerman
- Start date
oil barron
Member
- Location
- Aberdeenshire
Can you adjust the angle or height? The tip of the divider should be just below the majority of the heads
Mark C
Member
- Location
- Bedfordshire
Just ordered a pair of these from JMT Engineering.
£120 each
£120 each
Fragonard
Member
There's no adjustment on them.
Yeah the short ones aren't much good for winter barley ive discovered.
- Location
- Down on the edge of the world
We put short ones on our NH, long ones seemed to flex/wobble more and leave short bits of stubble in the sample. We did modify them slightly because if the barley was lied over it would hang on the divider, so a bit from a crop-lifter off the top edge helps flick it either way
is it new holland clayson 8070 or 8080 combine harvester?
is it new holland clayson 8070 or 8080 combine harvester?We put short ones on our NH, long ones seemed to flex/wobble more and leave short bits of stubble in the sample. We did modify them slightly because if the barley was lied over it would hang on the divider, so a bit from a crop-lifter off the top edge helps flick it either way
oil barron
Member
- Location
- Aberdeenshire
No it’s a TX34 Abu, but it would fit an 8070 as well. Was that you putting an 8070 on a river boat?
haha yes that was me
oil barron
Member
- Location
- Aberdeenshire
You legend.
- Tags
- barley new holland stubble