case 5140 wont move

M

mhhatton

Member

Livestock Farmer

• Jul 10, 2023

• #1

my 5140 case maxumm wont move in forward or backward in any gear, no lights on dash frontend loader works and steering wheel turn

 

KennyO

Member

Mixed Farmer

Location

Angus

• Jul 10, 2023

• #2

Check all the relays in the fuse box. Sometimes they come loose.

 

mtx.jag

Member

Location

pembs

• Jul 10, 2023

• #3

As above
Also worth checking if your tractor has a creeper box,that the lever hasn’t jumped between creep and normal and is sat in neutral

 

davidroberts30

Member

Location

pembrokeshire

• Jul 10, 2023

• #4

mhhatton said:

my 5140 case maxumm wont move in forward or backward in any gear, no lights on dash frontend loader works and steering wheel turn

Click to expand...

Check the bulbs in the 2 orange lamps if they arnt working at all

 

P

Pistonbroke

Member

• Jul 10, 2023

• #5

Our 5130 synchro is doing similar now and again and I'm sure it's the transmission control relay sticking

 

Wood field

Member

Livestock Farmer

Location

South Pennines ol14

• Jul 10, 2023

• #6

My 5130 did it once recently, I thought oh shite that’s all I need
Switched ignition off then when I re started all worked ok
Think mines lack of use and something sticking , been mowing etc and it’s all fine

 

P

Pistonbroke

Member

• Jul 10, 2023

• #7

Clutch pedal switches are a bit sticky on ours too, would a squirt if WD-40 hurt them?

 

davidroberts30

Member

Location

pembrokeshire

• Jul 10, 2023

• #8

Pistonbroke said:

Clutch pedal switches are a bit sticky on ours too, would a squirt if WD-40 hurt them?

Click to expand...

No it wont hure but wont get to where its needed
I would upload a pic but cant
New switches are aroumd 50quid

 

K

KiwiEd

Member

Location

New Zealand

• Jul 10, 2023

• #9

mtx.jag said:

As above
Also worth checking if your tractor has a creeper box,that the lever hasn’t jumped between creep and normal and is sat in neutral

Click to expand...

And if it hasn't got a creeper, (we had a 5140 once) bolt came out and gear fell off where creeper goes , was easy fix.

 

No5

Member

Location

South Essex

• Jul 10, 2023

• #10

KiwiEd said:

And if it hasn't got a creeper, (we had a 5140 once) bolt came out and gear fell off where creeper goes , was easy fix.

Click to expand...

We had that happen when we had one years ago.

 

mtx.jag

Member

Location

pembs

• Jul 10, 2023

• #11

KiwiEd said:

And if it hasn't got a creeper, (we had a 5140 once) bolt came out and gear fell off where creeper goes , was easy fix.

Click to expand...

We also had that on a 5150 years ago

Only time I’ve ever been glad to see a Massey