massey

650/65r38 & 540/65/r28 rims and tyres Advert added by: Machinery Details Category: Parts and Maintenance Wheels Price: £4250 Condition: Excellent Description 650/65r38 and 540/65r28 trelleborg tyres on Massey rims from a 2020 7718s dyna 6, 95% good. Rear...

Anyone driving the new new Holland 6 cylinder T6 160?

Having trouble with poor air con on a 1 year old tractor. Checking and cleaning rads etc to discover that the 3 drains for condensation are blocked. 2 run down inside the cab pillars which need a hole to allow the water to pass between two welded pieces of box. Hole blocked, near impossible to...

is the new incarnation of welger still manufacturing small balers? what other brands are available and at what price?

From my old contacts, I'm often sent emails like the one below. If anyone is interested, or knows anyone who might be, PM me and I'll send the contact details. -------------------------------------------------------------------------------------------------------------- I hope you are keeping...

How many oil control rings should be fitted to this engine? I pulled the pistons out, all six only had the top ones, the bottom ring groove below the gudgeon pin was empty. The new ring kit has arrived and it has 2, presumably for both. What to do?

Anyone got front linkage to suit a Massey 3120 for sale?

I have leak from the filler cap area of the tank of my John Deere tractor. I've tried a new genuine cap but hasn't made a difference so assuming it's the thread. Has anyone had any luck repairing the thread on a plastic tank?

Hi where’s the best place to buy mirror arms for my valtra t132? Are Massey the same?

I’ve been offered a job on nearby roadworks of driving a case 155mxm which would involve a dump trailer and slurry tank water with water. I could drive any tractor tbh but I’m particularly used with like a zetor 7245,Massey 135 and dextas, I’ve sailed around in a 110hp before but nothing major...

Hello, Is there any Massey Ferguson MF30 or MF500 available in market? Thanks.

Just out of interest, its not for sale. What would a New Holland 5030 combine with 13 foot header (and header trailer) be worth. Only done 120 acre a year, never washed (cleaned with compressor) only caught in odd shower, housed when not working (open fronted shed so some moisture from fogs in...

SALE OF 11 VINTAGE TRACTORS, DAIRY & FARM EQUIPMENT, VINTAGE MACHINERY, TRACTOR & OTHER SPARES, VINTAGE & GENERAL EQUIPMENT & WORKSHOP EQUIPMENT On behalf of Mr GWT & Mrs KE Ash SALE TO COMMENCE AT 10.30AM 11 VINTAGE TRACTORS 1947 Field Marshall Series 1 Tractor (In Running Order/ Serial Number...

Anyone got the procedure for transmission and clutch pedal calibration on a Massey 3645?? pedal bites at the very top :/ TIA

Hi all, Just looking some advice for a small square baler to make small hay, haylage and straw bales with. Will only be making about 1500-2500 a year. Looking advice as I haven't done much square baling before and so was looking for what I should be looking for when looking at balers or any...

So I have a 40k 24 speed powershuttle massey 4355. The only problem is that I'm getting 30 ish k flat out top gear, hare. The rear tyres are getting towards an upgrade, at about 15% , but would that be enough to slow it down so much? Any ideas what to look at/for elsewhere? Tia

Hi folks, i have a massey ferguson 3075 4wd. I just done the clutch and 4 new tyres. Problem is ive shuddering/vibration while towing a trailer over run down hill and uphill under pressure. Any ideas what it is pls. Thanks Ciaran

I have a Stoll loader with a Trima headstock, I am looking for a Euro 8 adaptor, any recommendations.

So in the next 6 months I'll have a bit of a shopping list of kit and additional wishlist for the next year's. Now I was always told that being loyal to a dealer was a good thing, discounts perks etc, and this almost always equals brand loyalty as that is the brand the dealer sells. Sometimes...

I want to buy 2 massey ferguson MF 30 or MF 500 width 4 meter, disc or tined coulters, double hooper ( fert And grain ), is there any stock please let me know.