ridger
Member
- Location
- Tyrone, Northern Ireland
Put on a picture of yours til I see if I could modify mine please
Slurry tanker gate valve not closing
- Thread starter ridger
- Start date
Stewart97
Member
Attachments
ridger
Member
- Location
- Tyrone, Northern Ireland
That's a pull spring as well, it's hooked on around the pipe fitting to pull the rod down
- Location
- sw scotland
Silage will always be a problem. You will be putting more force on the manual valve than the spring can. When empty we just keep pumping with the gate open for 10 se ends which usually blows anything out the back.
Stones, bits of cow mats and broken plastic feed tubs the more likely culprits here and we do scrape a fair bit of silage waste into slats too.
Stones, bits of cow mats and broken plastic feed tubs the more likely culprits here and we do scrape a fair bit of silage waste into slats too.