Search results

Never had to worry about this before but getting close to 170 average. When working out Nmax for a field of permanent pasture I'm taking a figure of 300kg/Ha. What is the amount of inorganic N I should apply over the year. Is it 130 kg/ha using total nitrogen content of FYM or 283kg/ha using...

Anybody any experience of them, I can't find any reviews on them

I've got some fields of permanent pasture that I had sprayed for weeds 2 years ago. Of course now the weds are coming back but no clover and they were rich in clover. Someone suggested I could feed clover seed to young stock grazing the pasture and reseed the pasture that way. Anyone tried this...

Anyone got any idea how I get the 8 little dowel things out of the old housing please.

Hi chaps, Having trouble with the above , it's the 2007 and earlier type. Dry joints on the circuit board but I can't separate the circuit board from the face plate. Seems to be stuck on the joysticks, taken the collars off but they don't want to pop through. There was also one nut on the board...

Hi chaps, I need help again. My 3350 is refusing to start on the switch. All the usual lights come on but the exclamation mark in a triangle light is flashing. It does this when the tractor is working properly for 2 reasons; 1, range lever not in neutral engine not started. 2, engine running...

Hi Chaps, Could anyone advise again please. Just rebuilt this engine, rebored block and skimmed heads new valves etc. It ran fine on initial startup but overnight filled cylinder 3 with water, other 5 cylinders fine. The reason for the rebuild was piston failure on number 3 cylinder possibly...

Could anyone help please. I am rebuilding a 1594, nearly complete but can't remember where the oil pipes go. I have a long pipe which ran in parallel with the rocker feed pipe and was held by the same clip. I have attached the rocker feed pipes but can't for the life of me see where this...

Help please, I have a teleshift ts440 which has broken the boom for the second time in the same place. I'm wondering if there is an issue with the hydraulics. I hope you can see it has broken in front of the main pivot. What do the vertical rams do ? They appear to be linked into the...

Hi chaps, I'm thinking about getting a telehandler/loader. I'm thinking either Manitou ml425 or JCB 520-4. Manouverability is the main criteria after price and reliability. Small farm, main job will be stacking/ feeding out round bale silage and mucking out in the spring. Will be working...

Hi chaps, Just wondering what other peoples experience is. I've sent a few fat heifers to market recently, I weigh them before they go and the last batch were down by 40Kg/head on the market scales compared to mine. Typically the cattle I send are grazing until about an hour before they reach...

Hi all, New to the forum, looks like a good place to be though. Quick question I was approached today about pylons and wayleave agreements, something about compensation and a one off payment. Has anyone else had this happen. What's the deal, or is it another scam? Matt