Search results

Would it have been impossible to get the part? Who sells parts for them?

There going a long time so are they? Are tcm forklifts the same crowd as old tcm loaders.

Anyone hear of the brand tcm before? I'm looking at buying a yard forklift branded tcm in an auction coming up in a retirement sale. Wondering where I will get parts for it afterwards though ?

What's the difference between the snow foam that's connected to a power washer lance and other normal traffic film remover that you could spray on with an air parafin gun? Which is better for cleaning machinery.

How hot are the tractors getting? As in just going above halfway or actually going into the red.

https://www.amazon.co.uk/Galvanised-Channel-Drainage-Grating-Driveway/dp/B079BYZJ7C/ref=asc_df_B079BYZJ7C/?tag=googshopuk-21&linkCode=df0&hvadid=309859586326&hvpos=&hvnetw=g&hvrand=7924497845176954080&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=20474&hvtargid=pla-697463456302&psc=...

Is new steel and cladding still climbing the whole time or has it dropped back in price?

Would you take a chance on this? One it starts and works of course. Is there much to go wrong with them? Wouldn't be getting mega work but handy to have when I want it. https://www.donedeal.ie/tools-for-sale/power-float-honda/29333418. Or...

Thanks for this. What do you mean by a pipe on stakes? I suppose you hardly have a picture of this? Good point about the sizes.

I don't want to pour it in One day in case anything goes wrong and concrete dries out too quick etc. It is 30ft wide and I wanted to do over 3 days doing 10ft widths per day. This means one run on the screed. I'm using old 6x3 timber purlins as form work. Concrete will be 6 inches thick.

https://www.enar.es/en-GB/products/pav-hu-4880/concrete-screed-huracan This is the screed I have. It is a 10ft. To the person who said nail in a 2 x 1 along the walls. I presume this timber is then left there for good as it would be almost impossible to get out?

I bought a vibrating screed. It is 10ft wide. I need to do a shed floor that is 30ft wide. I'm thinking of breaking this into 3 different days and doing 10ft widths per day. This is to give us a chance as there will be only two on us at and not to be overwhelmed by too much concrete at once...

Bought a kit shed which I'm about to start to put up.. Forgot to add in cross bracing when ordering up shed. She's is 47ft x 40ft. I'm thinking of using angle irons as cross bracing. What thickness of these is the norm? 6mm. Is cross bracing on the sides an overkill or will the roof do?

https://www.ebay.ie/itm/HIGH-FREQUENCY-CONCRETE-VIBRATING-POKER-110-VOLT-new-REDUCED-DONT-MISS-OUT/382883099272?hash=item59259c7288:g:508AAOxygo9Q8p8H&pageci=c9214ba8-8fcb-431e-b012-0978448195aa&redirect=mobile Would this be any good at doing the job I need it too?

Want to buy a cheap concrete poker for pouring shuttered concrete walls. Don't want to hire as I will be doing the walls over a few weekends so it will work out cheaper to buy and maybe sell later on. Walls will only be 5 ft high. What do i need to look out for in concrete pokers?

But are bull floats straight forward. For example is there anyone better than the other?

Will a bull float do to finish a concrete yard after a vibrating screed. What's the best type bull float to buy? https://toolman.ie/products/4ft-magnesium-bullfloat-kit https://toolman.ie/collections/bullfloats-1/products/big-blue-bullfloat-kit

Yes its annoying that there is no mark to show you where the 800 litres mark is.

It's a 0.8 cubic metre pto machine. There is no max line stamped anywhere in it. How far do lads normally fill them up too? Would this mix sound about right for 0.8 metres? 1500kg concrete gravel 300kg cement 120 litres of water

Are they a good job does anyone know? Its first job will be a concrete drive way.