Anyone hear of the brand tcm?
- Thread starter diyshed
- Start date
I use a TCM forklift yes. It has 15 odd thousand hours on it and gives no bother at all. Isuzu engine. Not sure where the dealers are exactly, but we have Kridan forklifts on the doorstep who I daresay could source whatever was needed. Its not my forklift but I've used it at certain times of year since 2009. I far prefer it to a Nissan we hired one year, for sure. Mostly due to the joystick on the Nissan.
TCM has been making plant for years. You can find your nearest dealer at www.tcm.eu
puntabrava
Member
- Location
- Wiltshire
I remember working on the A303 straightening east of Stonehenge with Raymond Browns, they had a TCM 25 ton loading shovel they were digging chalk out and loading A25 Volvos with, also a big old CAT slew that had come back from the Falklands.
- Location
- Netherlands
interned at a dealership who sold them and serviced them, we have an electric 1,5 ton and old 2,5 ton diesel ourselves, good pieces of kit. These days the are sold as unicarriers
There going a long time so are they? Are tcm forklifts the same crowd as old tcm loaders.
ridger
Member
- Location
- Tyrone, Northern Ireland
They were a reliable forklift. Used to be a carrot grower here with a few of them and they weren't given much sympathy
Limavady direction?
- Location
- North Norfolk
We had ours 30 years, it was a grey import from Japan so probably 40 years old when we had a poorly hydraulic pump last year and sold it. Photo from 19 years ago
ridger
Member
- Location
- Tyrone, Northern Ireland
Strabane end he was.
Would it have been impossible to get the part? Who sells parts for them?
- Location
- North Norfolk
It used to be United Forklifts in Thetford but nor sure who took over from them. I was looking for an excuse to fo up 1/2 tonne capacity and go electric
Dave W
Member
- Location
- chesterfield
Just been in an auction yard and seen the old service van for sale
- Location
- Devon - by the sea
TCM forklifts are imported by Unicarriers in Thame.
I have been talking to them recently about TCM skid steers but they don't bring them, or build them into Europe. Asia only for the Skid Steers.
I have been talking to them recently about TCM skid steers but they don't bring them, or build them into Europe. Asia only for the Skid Steers.
If you want any parts or know where TCM dealer is near to you, put an enquiry on www.forktrucks.com - lots of very knowledgable people for the fork truck industry on there.