Search results

Looking at this model of Krone tedder, 12 rotor machine. Anyone any experience with them? They look well enough built😃

My old Ingersoll rand 7/71 has packed in and I’m looking to buy a new/tidy second hand compressor. The standard max bar on compressors is usually 7 bar but u can get some that work to 10 bar and the pto type compressors seem to go to 10 bar. that would make a huge difference to blowing out...

We’re looking into installing a 33kw Anaerobic Digester to run off just dairy slurry from 450 cows. Just producing enough electricity fir ourselves. Have been to see one down in leeds that was working well. Anyone else got/know of one? Just hoping there will be enough energy in the dairy slurry...

Trying to get the pulley off the back of the kuhn power harrow, tried everything, there was 3 allen headed bolts in partially threaded holes originally... I took them out and screwed them into the fully threaded holes thinking that would release the hub but it’s still solid? anyone any ideas? 😃

We’ve a one pass kuhn accord combi and I’m looking into setting the control box for 24 meter tramilines. It has 4 shut offs in the hopper, 2 either side. If I set the rythmus to number 8 it only tramlines on number 4. I was assuming it needs to tramline on 4 & 8 if I want to work at 24 meter...

Trying to fit a stortz 5” coupling onto a new piece of snaptite pipe that I have, I’ve fitted loads before but this pipe is ever so slightly smaller inside diameter and won’t slide on, I can get it over the first rib with a heck of a struggle but it’s nothing like going right the way up...

Looking to update the dairy foot crush, we get a guy in monthly to do the routine work but do approximately 3 cows a day ourselves. What make would folks recommend? Would like to have a fairly decent spec.

I’ve got a KV geo spread spreader and when setting it up for spreading a product I can never find the product I’m spreading or much close to it on the KV app(after doing the shaker test etc) for example 25-3-3 at the moment. Mostly always spreading Origin fertiliser blends. I regularly tray...

Where would I source one of these? I’m assuming that a normal shurflo silage additive pump would quickly die with propcorn? [emoji848]

I’ve just sprayed off a grazing field that hasn’t been ploughed for years due to it being impractical due to knowes etc. Usually we’d go in with the discs once it’s killed off and have to pass it 4/5 times to get a good tilth. Instead of that I was thinking of direct seeding forage rape to...

Looking to fit rubber on top of current slatted shed slats for fat cattle. Have done other shed years ago with black rubber strips that covers 2 slats and locks in between them. Any recommendations for best makes now? Have seen the green type ones that clip over the slat?

Currently refurbishing my QM11 silage trailer.... the channel iron cross members above the wheels had rotted away so saving the old girl before she’s scrap[emoji51]. Complete shot blast, welding new channels in, adapt body for flotation wheels etc.... The chassis will be black and the body’s...

Kv

Loaded up to start spreading today and the telus box won’t connect to the spreader, tried all plugs etc. It did connect up briefly whilst wiggling the plugs on the back of the box but can’t get it to do that now.... anyone had an similar issues?

Is there an automatic lamb feeder that you can feed liquid milk into i.e cows milk?

Where would be best to source a set of chains for my rotocut 255? Or should I just get them from the class dealer? [emoji50] [emoji385][emoji85]

My 1 year old loadall is needing a service.... I’m assuming it’ll be semi synthetic engine oil in it... Can I replace it with my standard Q8 T 750 15W40 or do I need to get the expensive (I’m thinking) JCB synthetic oil?

Thinking of buying a new trailer that could shift both muck & silage. What would be the best heavy duty silage trailer for this job? Ideally with removable high sides(top 2 feet or so) to make loading with muck easier. Hydraulic back door would be essential obviously. Herron look well built?

My Trimble 500 isn’t picking up signal anymore.... shows 2 yellow bars but needs 4 before it will work. I’ve tried a new antenna cable but no better..... will the antenna be knackered? Connections look good on it & the Trimble screen.

Currently have a murska 700 bruiser & looking to replace it. Looking at the Korte 700 or the Superior 6000..... anyone any recommendations? any other makes worth looking at? It’s just for doing our own stuff. About 400 tonne a year.