Propcorn applicator

[JPM]

Where would I source one of these? I’m assuming that a normal shurflo silage additive pump would quickly die with propcorn? [emoji848]

 

[Half Pipe]

Got 1 of these years ago, pipes loose flexibility after propcorn, but not a bother for us as usually same layout

http://www.selmechsupplies.co.uk/crimpmaster.htm

 

[rob1]

Where would I source one of these? I’m assuming that a normal shurflo silage additive pump would quickly die with propcorn? [emoji848]

we used one for a few years without issue

 

[Chae1]

Where would I source one of these? I’m assuming that a normal shurflo silage additive pump would quickly die with propcorn? [emoji848]

Kelvin cave. They're just silage applicators though.

@Wakely grain mills might have something too.

 

[herman]

Is propcorn still available nowadays ?
Just a random conversation we were having yesterday.

 

[balerman]

Is propcorn still available nowadays ?
Just a random conversation we were having yesterday.

Caled Prograin now,same product and still cost effective if you can put up with the hassle of doing it.

 

[herman]

Right, we used it when I was a young whipper snapper, we used to call the applicator the daleck because it looked scary and we were told to keep away from it !!!! I can remember it having a bell on it that rang every so often , presumably when it ran out of liquid.
Could have been yellow or orange, tall ish with dials and taps with the odd gauge .

 

[e3120]

Think we had one of those, bit like a petrol pump on castors. Memory vague, except g-clamp and bit of box section permanently holding fail-safe button, whatever that did.

 

[Ormond]

We use it out of an IBC...through a flowmeter...set the ibc on another. ..just gravity fed. Augar moves around 22t an hour. we found too much to go wrong with pumps. Works well

 

[Will 1594]

5 gallon drum drill hole in it pull a tyre valve through hole bit of pipe and calibrate auger tonnage and adjust pipe flow with mole grips accordingly.

 

[celtis man]

We have a barrel pump with a variable rate control box, flexible hose and a spray nozzle effort bolted to the grain auger, different colours of nozzle apply different rates.