Looking to insure a 150hp tractor with a value approx 45k fully comp 95% contracting use, also public liability insurance to be covered for digger work, and all the usual nothing out of the ordinary really. Been quoted £1815 just for the tractor??? Seems wildly over the top? £1200for public...
Looked at two vaderstad carrier xl with big discs, one with the discs arranged in a “v form” the other in a “x pattern” while the x didn’t crab at deeper depths the finish was somewhat unlevel, where as the V crabbed a little it was a far better finish, this could be slightly fuzzy comparison as...
So, as the title says really, we currently run a set of 5.5m ish.... 23c discs and a single dd ring press for the first pass on heavy land, but were looking for a more of refined tool to the same job, for all its ability to penetrate the ground its finish isn’t very level, it’s also not quickest...
We have moved to 36m boom width for this year, and we have always used chafer stream bars for all liquid fert applications, but we will need some more to cover the extra 12m of boom, looking at the current stream bars there getting old and worn, and would probably need to change a fair few in...
So what’s everybody’s thoughts on this, looks very good, having driven 6 different crawlers over the year’s and a big fan of tracks, I do like this new offering of four tracks in a smaller frame than a quadtrac etc, yes it’s not articulated but looks to be better offering than the half trac...
Does anyone have any experience with the above mentioned system?? Struggling to get it it pick up a EGNOS signal, and it’s not the easiest system to work out.. TIA
We have the pictured discs, and it’s come to reblade the front gang this year. We changed the rears last year to 30” cutaways, but I’m wondering if I can fit the same on the front gang? What’s the idea behind having 28” on the front? Just thinking the fronts would last longer and be all the same...
We have a stocks turbo jet we use for planting osr, but I’m having issues with a consistent under applying of the rate, I want 4kg/Ha I have to set my rate to 4.3. It’s been like it across thee variety’s, I calibrate 3 times, 150g,800g and about 1.2kg and it’s usually within a couple of grams...
We have the above sprayer which has 6200 litre tank, long story short the sight gauge reads correct when filling and on our weighbridge, but we cannot get the pressure sensor to read the same on the 2630 display in the cab, even after doing a tank shape calibration, through the 2630, i.e 500...
Evening all, currently running the above receiver on a 3 network SIM card, for RTK correction,but it’s not great, compared with radio base station, the correction via NTRIP seems very unstable, with the HDOP figure fluctuating around erratically all day and at times rendering the auto steer...
Our JD 6930 is need of a new seat, tractor is on big 710 tyres and has no cab suspension, and to be honest the current seat doesn’t cut the mustard, has anyone fitted a different seat to the current one fitted in 6030 premium tractors? Current seat is a MSG 95 grammer seat... be nice to try and...
Front Weights: John Deere -
Category: Front Weights Manufacturer: John Deere Price: £1500 Condition: Used
Description:
2015 AgriWeld 1250kg weight/toolbox
To fit John Deere’s
LED srobes
Front Marker pole
Two tool boxes
£1500 o.n.o
Contact Andrew, 07785 232366
Images:
See the...
Got a APV ps250 seeder unit with the control box in the attached picture, machine used to have a land wheel for forward speed related metering,unfortunately it got bypassed and was slung in the scrap bin and the machine was used as a fixed speed system. In practice it worked and was accurate...
Afternoon, we have a John Deere trailed sprayer that we are having some issues with.
Basically it has a hydraulically driven compressor on board the sprayer that's controlled by the John Deere hydraulics on the sprayer etc. But can anyone see a problem with us using the air supply from the...
Drills: Kverneland - TS Evo
Category: Drills Manufacturer: Kverneland Price: £16000 Condition: Used
Description:
2012Kvereneland TS Evo 600 6M drill.
Hydraulic Fan
Wheel eridicators
Bout and Pre Emergance markers
1 Ton seed Hopper
Signus Control box
£16000 o.n.o
Andrew 07785 232366...
Combine Harvester and Accessories: New Holland - CR8080
Category: Combine Harvester and Accessories Manufacturer: New Holland Price: Price on application Condition: Used
Description:
2013 New Holland CR8080 Combine
30ft VariFeed header
24inch tracks
Intellisteer GPS
Yield mapping
745...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.