I’m sure many of you will know people who suffer from Parkinson’s Disease and understand what a challenging condition it is to live with. There is still no cure – those diagnosed can only try to mitigate their symptoms.
As is so often the case, it largely falls to the charitable sector to...
LKL Farming grow 1600 acres of crops near Howden, East Yorkshire and are looking to recruit a machinery operator / tractor driver for Harvest.
We grow wheat, oats, oilseed rape, vining peas and sugar beet. Our machinery fleet includes New Holland CR9080 combine, Challenger 765E, Sands sprayer...
We've built our own trailing kit for a cousins flatlift. It's a copy of their own kit with 2 hydraulically pivoting wheels either side where the depth wheels would normally be. Issue we have is that the 2 wheels don't lower/raise at the same rate so we end up lopsided lifting out. Can anyone...
I'm looking for an older Walton or Arcusin bale chaser that I can adapt to suit CTF.
Needs to handle 4x3 bales
Looking at older machines, £30,000 max, that will do 3-4000 bales per year without too much hassle
I acquired a Case AG372 receiver with a second hand tractor. I assumed it was just EGNOS but I see it has Omnistar and RTK options on the screen. Does this mean it is unlocked to Centerpoint/RTK or are the options always there? Can't get an answer from local Case dealer (I didn't buy it from...
@Cab-over Pete
@Vincent
A filter kit was mentioned in a couple of Xerion threads for Cat C9 engines:
--
The Cat media number for the online filter kit is M0081390-01.
Filter. 503-7470
Elbow. 439-1889
Hose. 503-7469
--
I'm trying to source this via Challenger dealer who have gone to Finnings...
I have 2 Case Puma tractors and a kverneland fert spreader running through a tellus isobus screen.
On one of the tractors I can plug fert spreader into rear, plug screen into rear pillar isobus socket and away we go.
On the other I connect up using same cables but get nothing, no power to the...
I’m looking for a tool to level paddocks and trackways on outdoor pig fields. The idea is to keep on top of it rather than get to the point of needing a digger! We’re talking sand land with stones that sets like concrete. Ideally something 100hp would handle.
Considered various options like 3m...
Is it possible to transfer guidance patterns from Trimble GFX to Case 700 screens via Gatekeeper?
I've tried data transfer from GFX then importing but Gatekeeper won't find anything.
The GFX isn't listed in Gatekeeper but I've successfully exported AB lines to the GFX using the FMX/CMX profile...
We are a 1700 acre farm near Howden, East Yorkshire. We are looking for a tractor driver to start before harvest and become part of our full time team. Initially the role will involve tractor driving tasks such as leading grain, straw, compost, some cultivations and other general farm work in...
I've managed to "misplace" the charger for a set of these wireless lights. Evidently Sparex don't supply the charger separately.
Any chance someone who has a set could check what the tip size, voltage and polarity are so I can try and source a generic charger?
Thanks
I have a couple of "off grid" sites where I'd like to install security cameras and recording facilities. During the day we run off generators but I don't want to be running them overnight just to run some cameras.
My plan would be to setup a NAS drive/camera/4g router type system as described...
Can anyone identify this road sweeper please. It mounts on pallet tines with a brush at the back sweeping forwards into a tray. Used to be yellow.
Any idea where I'd get new bristles?
Also it has a ram to tip the tray, plumbed into the main hydraulics, but I've never managed to get it to work...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.