I’m thinking of taking our forage harvesting back in-house again after some difficulty getting our contractor on time, I have the staff and most of the kit.
I’m looking at buying a used forager but want a long chop length as our milk buyer is a cheese manufacturer and I am paid on milk solids...
Looking at a set Bridgestone VF 710 70 42. Not had any experience with VF tyres and choose is limited at its a new build tractor so only being offered Bridgestone or Michelin in VF. I could put a set of non VF 710s on and change them to a set of VF of my choice and sell the non VF ones
Ok lads time to pick your brains instead of your noses today I've got a 2014 horsh sprinter 4st and want to do veri rate drilling slight snag is the isobus from the drill to the tractor ain't on speaking terms so have decided to put the drill box into the cab but really don't want to try a...
We've got a 2019 6175r with the 4600 display and premium radio. 2 or 3 times a day during use the Bluetooth disconnects and it switches back to the radio, it doesn't say 'bluetooth disconnected' it just jumps over to the radio and won't automatically reconnect as if it briefly loses power?? I...
OK, now I need help & guidance from the collective wisdom of you DD/Strip till boyos (& girlos).
Is there a single pass drill that is capable of drilling grass seed, cereals and maize and make a proper job of it or does trying to do this compromise the whole operation & you fall between 2...
These are my 3 tractors for 2500 acre arable and a few sheep. I love the simplicity and yet have enough tech to do everything I need.
Lowest hours 4400 highest has 6500.
but I will keep rebuilding them as nothing else really floats my boat.
Hi , I’m looking to put 650/60 r34 on the front of a jd 6250r
Has anybody got a set or just the rims? (20x34)
Alternatively some bolt in centres 10 stud 280mm centre hole 105mm stud hole to hole.
This is a fairly common size fitted to JD 6r series and Fendt 700 and 800
Am I daft to consider a 6 furrow mounted plough (Kuhn varimaster auto reset) are they to big for carrying on the arms ? I would have a semi mounted but awkward shaped fields put me off ! Any advice would be good !