quicke

I plan to fit a front loader to my new holland tt55 tractor, there is hydraulic connections on the back of the machine but none near the front. I have located the block where the rear hydraulic lines leave the engine, can connections be added at that point or is it easiest to connect to the...

Hi all, I have an old knackered 2230 quicke loader fitted to my case 1394 by the standard quicke side brackets. Would a quicke 2300 E system fit on the same tractor brackets? Not sure what the E system refers to? thanks

Having some difficulty with placing a value on a some tractors I have s , a dealer who seems to always have some for sale, suggested he only puts a grand on when he sells a tractor, but then offered me several thousand less for mine, than what he has up for Sale.. 😂 Tractor 1) 6910 W reg...

Modern take on the old back actor. Uses built in controls from the reverse drive version of the tractor?

Good morning all. Best wishes for the new year!! I have quicke brackets fitted to my deutz tractor along with a split hydraulic system for the loader and front linkage. I’ve just bought a quicke q66 loader boom to fit the tractor. Looking at the hydraulics that all appears fine, however the...

I have lately been wondering whether feeding up our cows every day with a telehandler is as efficient as it appears?? telehandlers by their very nature are fuel hungry with big engines, torque converters and heavy weights? With diesel going up as it is - I’m going to experiment with running...

TE00396A - 2002 Massey Ferguson 4260 Tractor Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Tractors Farm Tractors Price: £18950 Condition: Good Description 2002 Massey Ferguson 4260 4WD Tractor & Quicke 450...

TD000554 - 2019 Valtra N154EV Tractor Advert added by: Chandlers (Farm Equipment) Ltd Machinery Details Category: Tractors Farm Tractors Price: £87000 Condition: Used Description 2019 Valtra N154EV 4WD Tractor & Quicke G5 Front Loader...

Looking at swapping wheels on for bigger ones anybody know if you can edit the size under the command centre to fit new wheels

Has anyone ever made a weight for the back of a tractor so that you can hook a trailer on at the same time, can it be done. Has anyone any photos or ideas how it could be done.

Hey guys, I’m a newbie & looking for some advice Looking for a tractor to do light work such as mowing paddocks, levelling driveway, a bit of loader work etc Thinking along the lines of 60 - 100 HP & will be buying new Any suggestions? Or just as important, any manufacturer’s to avoid?

Looking to get a,new front end loader. Which one do people reccommend, may be the lower end of the price range. tractor is a MF6150. TIA

Quicke toe tip bucket Advert added by: James Duggan Machinery Details Category: Loaders and Attachments Front-end loader Price: £1200 Condition: Good Description Quicke / alo toe tip bucket for sale on quicke loader brackets. Good condition, only used for...

“THE SOUTH WEST’S LEADING MACHINERY AUCTIONEERS” NOW LIVE! – OUR FINAL ONLINE SALE OF 2021! THE SOUTH WEST WINTER ONLINE TIMED COLLECTIVE SALE OF 50+ TRACTORS, EXCAVATORS & VEHICLES, FARM MACHINERY LIVESTOCK & GENERAL EQUIPMENT CLOSING ON SUNDAY 5TH DECEMBER (FROM 7PM) ENTRIES SO FAR...

Evening , just wondering if anybody else has a quickie Q46 loader brake up around the rear piviot pin on the top ? it has cracked off around the bush . sorry i do not have photo's Any way we have taken it for a hopeful repair but i am wondering if it's happened to anyone else ? its been on...

I need some help deciding what my next tractor will be, I’m pushed for time so need this sorted this week. yesterday I drove above 2 hours to look at a claas arion 640, 57 plate, 5500 hrs, quicke loader, fairly tidy but needs a couple of little jobs doing. I’ve never even sat in a claas before...

Hi all, Im after a loader for my Ford 7840 and nothing second hand seems to fit a 6 cylinder machine or sells too fast for me to make my mind up. Couple of new options, border plant can supply me a Metal Te loader for around £5k + VAT but never heard of this make? Other option is I go full in...

We’ve got a quicke loader with the single crowd / dump ram with the v shaped bracket going to the bucket/ fork it’s a right pain to change anything over . Will one of those quick fit frames fit and are they any good ? Tia

Needing a new purchase unfortunately. Think a 1.9 metre 3 ram albutt is my favourite. Although it has hardox tines and I'm unsure how easy they will push into the clamp? Second option an £900 cheaper is a quicke 2 metre 3 ram with kv straight tines. Athough i dont think its as strong built but...

has anyone got one? Really like the look of them in the cab but not seen one in the flesh we are looking for an extra tractor to take the strain off a tractor with 12000 hrs but keep the old one as a spare. Jobs would be grain/silage cart, rolling, mowing, spraying with big mounted sprayer, fert...