As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
2016 7720 steer ready with an aftermarket Agleader Incommand on RTK.
The tractor is sitting approx 25cmm off the line always to the right. The problem was intermittent. I had this before and the problem was with the tractor rather than the Agleader system. Problem sorted out by dealer at that...
Recently purchased a challenger sprayer with the above setup .. I've been told its unlocked to rtk but ive no idea where the modem or sim card goes to use it at a higher level than egnos. Can anyone shed any light on this?
Also today it wouldn't pick up gps signal... Im not sure if this was...
Bonjour,
Je souhaite connecter une caméra à mon TOPCON X30 ou Imonitor 2.
La caméra est équipée d'une prise à 4 broches.
Vous devez connecter la caméra au port USB du X30, pour cela vous avez besoin d'un adaptateur (câble spécial).
Chez TOPCON, le câble vaut 550 euros, j'ai trouvé un autre...
Basically are there different options for the autoteer ready tractors . McComick are using topcon but i arent happy with the price for a kit that wont access my rtk radio base station.
Or are there cheaper NTRIP casters ?
Right here goes...
My AGCO (topcon) Agi-4 dome on my MF tractor has died (according to dealer) so I need to replace it but a new one is £6500:mad:.
Can I use a topcon Agi-4 instead and just move the snap in modules across? I have been advised that this will work by another dealer but I thought...
How to configure RTK on Massey Ferguson Trimble AG-382 8737 Dyna VT, to connect to a TOPCON RTK base
Topcon MR-2 Base with SRL-35 External Radio
Frequency range: 410 to 470 MHz
Protocol: SATEL 3AS
PDL GMSK
PDL 4FSK
TrimTalk (P)...
Written by Matt Hopkins from Precision Ag
Satel designs, manufactures and offers high-quality connectivity solutions that enable secure, mission-critical connections.
The post Topcon Acquires Finnish Industrial Radio Solutions Manufacturer Satel appeared first on Global Ag Tech Initiative...
hi Running a 3000 topcon screen on a Massey 8732 . I have a issue when using the drawbar option on slurry using a tanker and dribble bar the A B lines start of straight but as it goes along the lines change direction almost going across the original A B line . But when its on fixed attachment...
Hi,
Sometimes i need to adjust the contour-waylines around the field. Say you have 15 m headland, and you want to move it 50 cm in from the boundary. I move the tractor to where i want it, and hit the button to "move wayline to current position". Works fine, but is it possible to save this...
Topcon X25 simple guidance set up. Had an update recently, accuracy has went out the window, when I leave the field to fill when I return it foesnt even think it's in the same field. An suggestions? Should all these boxes in the picture be ticked?
TIA.
I've just moved from Rangepoint to RTK Ntrip but I seem to be loosing signal mid afternoon, it works flawlessly up until that point. I still didn't have it when I left the field at 7 last night but the night before it came back about 9pm.
I changed back to Rangepoint when I lost it and that...
If anyone is looking for an easy to fit RTK Autosteer kit thats very user friendly then the NX510se from CHCNAV is proving to be very good.
I know there are people that like to tinker and make their own systems and i take my hat off to them but there are also plenty of people that want a kit...
Right, humour me, am in the notion of fitting rate control and gps section control to a 21m GEM trailed that we bought as a project. Predominately a grassland farm here and don't do an awful lot of spraying but if I had this machine tidied up it would give me good capacity and last me my day. We...
GM035802 - Topcon Autoguide
Advert added by: Chandlers (Farm Equipment) Ltd
Machinery Details
Category: GPS and Farm Electronics GPS and Precision Farming equipment Price: £1850 Condition: Good
Description
Used Topcon Autoguide
How to make contact with the Dealer...
In the next 6 months we are due to take delivery of a guidance ready MF. A NovaTel basic receiver is pencilled in, but very cancellable. We have 2 topcon units, one is an aged Agco unit, hence the reluctance to take the Agco NovaTel. But Topcon give the impression of moving away from guidance...
What will a rough cost be?
Looking at fert spreaders and they tend to be isobus 2015 onwards.
May aswell try for autosteer aswell.
We run a Massey 6480 t3 with datatronic (old isobus) I don't think this will do much with a modern machine.
Can I add the data5 screen etc with a view everything can...
GM035864 - Topcon Base Station
Advert added by: Chandlers (Farm Equipment) Ltd
Machinery Details
Category: GPS and Farm Electronics GPS and Precision Farming equipment Price: £2000 Condition: Used
Description
Topcon Base Station
Hiper AG
How to make contact with the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.