wrapper

Anyone run or have experience with one of these McHale Orbital wrappers? Currently have a McHale 991BJS looking at upgrading. I have looked at the McHale HS2000 but was sort of advised to avoid it as its a bad engineering design "Apparently"

Hello, I have bought a mchale 991b a week ago and the cut and tie isnt working right. When you press the lever it will put the presure on to close the cut and hold system however the wrapper wont allow the cut and hold system to open. I have took a pipe off and when the pipe was off i was...

I have recently bought a kverneland 7640 wrapper and all in all a good wrapper however i find it is slower than my previous t8 The machine is 2009, i set the speed on the control box to 100% and it does about 26 -28 turns per minute, i feel like my older kverneland t8 was alot faster. By any...

I have just bought a Taarup 7640 at the weekend to upgrade my older t8 wrapper, does anybody know when these were made to as the man believed it was somewhere about 2008 or fresher as he bought it as a demo machine in and around 2010. Also in the settings it gives the option for slowing the...

Hi, been on the look out for a second hand tanco 1320 for the past few months but nothing seems to have come up. Just wondering if anyone on here might have one they are thinking of selling? Preferably as close to the south west as possible but will travel for the right machine. Thanks Nick

As per the title, bought new last year but ended up making hay out of the stuff we bought it for. Have since moved to round bales so no use for it now. 250mm for use with mini bale wrappers making conventional bales. 6 boxes, unopened and dry stored. £150 for the lot. Newthorpe, Nottingham.

Looking at a second hand wrapper to purchase. Elho 1620 automat , Taarup 7420 , or a Tanco 580 A . Elho cheapest , tandem , but am unsure of its unconventional pickup and speed. Taarup , looks ok , but a couple a grand dearer than the Elho , never used any taarup equipment before. Tanco is...

Our 991lber is turning past the stop on automatic so the cutter does not align with the scissors or arm when completing the cycle. Has anyone had this previously and knows any fixes ? The bales are starting to mount up now. Thanks.

Does anyone have any experience of using trailed Lely Attis round bale wrappers (newer electric versions). Looking to replace our old tanco wrapper, ideally would like to upgrade to a newish Mchale, but prices and availability are working against me. Found some Lely models, but know little...