Many Thanks for your reply100% feedback with 1150 sales so your safe enough.
i only ever use paypall on the bay, it guarantees my purchase or my money back.
So is it the piece of plastic the joystick handle tube screws into , and the ball ends of the two cables slide into , and the fixed pivot ball goes in the third slot?I have a mx loader, the joystick has broken. Just the moulded plastic part has cracked and broke. The part where the cables attach is all fine.
Anyone know of a part to replace it with?
Google “McHugh Components”, if you download their Hyraulics Catalogue you may find what you want in there.I have a mx loader, the joystick has broken. Just the moulded plastic part has cracked and broke. The part where the cables attach is all fine.
Anyone know of a part to replace it with?
I ll take a photo, i have to tape it up again tomorrowSo is it the piece of plastic the joystick handle tube screws into , and the ball ends of the two cables slide into , and the fixed pivot ball goes in the third slot?
Just Googled Mx joystick and it looks more sophisticated than the joystick on my MF390
I have a mx loader, the joystick has broken. Just the moulded plastic part has cracked and broke. The part where the cables attach is all fine.
Anyone know of a part to replace it with?
Where could i find 1? Tried google. Just need a plastic bit with a button for the third service. This is 2nd one to breakThe handle with the buttons that you hold onto? That unscrews off after you’ve cracked open the lock nut. Any joystick handle will fit as they’re mostly the same thread.
i replaced maleaux (spelling ) joystick with the gearstick from a bl montego estate car, and added a rocker switch taped on the side for the 3rd serv. sol. cost about fifty p stronger than that plastic stuff..I have a mx loader, the joystick has broken. Just the moulded plastic part has cracked and broke. The part where the cables attach is all fine.
Anyone know of a part to replace it with?
I hope you are correct. I bought a few parts from Kramp last week, never again!!!!https://www.kramp.com/shop-gb/en/p/joystick-handle-1-puschswitch-with-detent--SD918L16 (in stock and 30% lower in price than Sparex ;-) )
PM me the details.I hope you are correct. I bought a few parts from Kramp last week, never again!!!!
Admittedly I bought them through a Kramp
distributor.
I have not yet received my order which I made on June 10th ,and Ebay say I should receive it by July9th!!!!100% feedback with 1150 sales so your safe enough.
i only ever use paypall on the bay, it guarantees my purchase or my money back.