Dad insisted these had a thread of their own, he's worried they'll get lost amongst my crap!!
Measurements to the best of my ability/knowledge!!
Pair of 13.6 x R38 Taurus tyres, somewhere about 60% tread. 8x 32mm holes on an 8"PCD with a 140mm centre hole. The centres have unfortunately been welded in to the rims at some point as shown.
Pair of 12.4/11-24 Lassa tyres, about 50% tread. 5x 26mm holes on a 334mm PCD with a 280mm centre hole.
These were the wheels we used to put on out 7740 for beet hoeing at 60" centres. Have been dry stored undercover when not in use. No major cuts that I can see.
Would prefer to sell as a four but would consider splitting.
Measurements to the best of my ability/knowledge!!
Pair of 13.6 x R38 Taurus tyres, somewhere about 60% tread. 8x 32mm holes on an 8"PCD with a 140mm centre hole. The centres have unfortunately been welded in to the rims at some point as shown.
Pair of 12.4/11-24 Lassa tyres, about 50% tread. 5x 26mm holes on a 334mm PCD with a 280mm centre hole.
These were the wheels we used to put on out 7740 for beet hoeing at 60" centres. Have been dry stored undercover when not in use. No major cuts that I can see.
Would prefer to sell as a four but would consider splitting.
)
