135 back end filter

devonshire farmer

Member
Mixed Farmer
Location
Devon
Took this cover off on right hand side as there was nothing under the bottom plate with 3 bolts on
 

Attachments

  • IMG_20200606_112046.jpg
    IMG_20200606_112046.jpg
    428.8 KB · Views: 0

Sausage

Member
Take the plate on the left hand side off which has the PTO lever on it. Put it in land drive first to help putting back together. Filter is right inside the casing, should have locking wire through the cap, bit of mig wire will do the job.
 

devonshire farmer

Member
Mixed Farmer
Location
Devon
Take the plate on the left hand side off which has the PTO lever on it. Put it in land drive first to help putting back together. Filter is right inside the casing, should have locking wire through the cap, bit of mig wire will do the job.
In your experience would you take the wing off?
 

devonshire farmer

Member
Mixed Farmer
Location
Devon
It is tight. I took the footplate off and sat on the floor to do it, didn’t fancy taking the wing off as there is a cab on mine, but that would have been easier
Out and cleaned and back in, just needs to be wired back in later!
 

Attachments

  • IMG_20200607_091016.jpg
    IMG_20200607_091016.jpg
    328.3 KB · Views: 0

Will you help clear snow?

  • yes

    Votes: 68 32.2%
  • no

    Votes: 143 67.8%

The London Palladium event “BPR Seminar”

  • 8,805
  • 120
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top