Jon
Member
- Location
- South Norfolk
Could anyone tell me how to get plug off pins so that I can remove cable from cultivator frame.
It's off a Stocks applicator.
It's off a Stocks applicator.
I'd get a pair of these terminal extractors for a bit more than a tenner in the toolkit, then you have a variety of tube sizes to suit (and prongs etc) for various connectors...
View attachment 542334
Can I not just bodge it and add a dab of solder?Make sure you get the correct crimp pliers for the pins . (warning they are not cheap)
Can I not just bodge it and add a dab of solder?
Can I not just bodge it and add a dab of solder?
Make sure you get the correct crimp pliers for the pins . (warning they are not cheap)
I would!
Feck seen these fancy pliers at £200.
That set is Durite 0-703-99 like from here (they are out of stock, but you get the drift)Got a name for these for me to google? Have just busted an AMP superseal trying to get the pins out, hope it would do these. Have also just bought a set of those 16 pin connectors for an Ez Boom, and suspect there'll be some trial'n'error before it's up and running.
Yes you definitely offer sterling service and great value on Deutsch stuff and very nice LED lights! I had already bought my HDT from over the ditch, about 4-5 years ago, substantially less than what RS, Farnell and co sell them for here.The Deutsch HDT-48 also does the three sizes. Size 12, 16 & 20. They can be sourced for just over £200
You can also get a crimp tool for the size 16 contacts for around £45. This one isn't adjustable but works well.