1976 jcb 4 in 1 bucket

[Pigken]

Hello, have above machine, wanting to get hoses made to go between machine and bucket. Does any one have one. Could you measure how long they are please. Thanks

 

[Mur Huwcun]

Tip the bucket right over and measure with a piece of string. If you want you could tie the string on and crowd and dump bucket few times to double check.

 

[Pigken]

Thanks, have tip/crowd rams off getting resealed so can not at present.

 

[davidroberts30]

Make it so the loop of the hose goes as far as the lower pins
The hose will be right then

 

[essexpete]

Is the top of the arm getting clouted by the ram collar on full dump/tip?

 

[Pigken]

Yes,

 

[ACEngineering]

Is the top of the arm getting clouted by the ram collar on full dump/tip?

All the jcb's do that! Only need a little bit of wear in pins/bushes as it's very close when new.

 

[essexpete]

All the jcb's do that! Only need a little bit of wear in pins/bushes as it's very close when new.

Yes but it can be stopped by a stop on the bucket. If the holes the holes are worn that the bushes sit in the it would need a lot of work for an old occasional use machine.

 

[mx110]

Sorry to go slightly off topic but on the subject of old 3c's don't suppose anyone knows of a rear jaw bucket lying anywhere?

 

[ORRA LOON]

Sorry to go slightly off topic but on the subject of old 3c's don't suppose anyone knows of a rear jaw bucket lying anywhere?

Jcb still make them.

JCB Jaw Bucket | Excavator Buckets | JCB.com

JCBs Direct Mount Jaw Bucket Used As A Standard Digging Bucket Or A Powerful Hydraulic Jaw. Increased Strength And Wear.

www.jcb.com