2006 Case mxu115 rear wheels

[Nooie]

Hi. Wondered if anyone could help me out. I damage one of the centre dishes on my 2006 case mxu115 xline. 38inch rims. But am struggling to find a replacement. Was in touch with case but they think that the rims wer changed. The hole in the centre of the dish is 140mm and the distance from nut to nut is 205mm. The distance on the holes that bolt to the rim are 140mm but the new centre I was goin to get was only 80mm. Thanks.

 

[robbie]

My 05 mxu looks to have the dished you describe with 80mm between rim bolts.
I'll measure properly when I'm in the yard and have a tape to hand.

Could they be ford 10 or 40 series wheels, I know they'll fit as they have the same hubs but I don't know the rim bolt measurements on them.

 

[Nooie]

My 05 mxu looks to have the dished you describe with 80mm between rim bolts.
I'll measure properly when I'm in the yard and have a tape to hand.

Could they be ford 10 or 40 series wheels, I know they'll fit as they have the same hubs but I don't know the rim bolt measurements on them.

Them wheels so look different. Not sure why unless someone had changed the ones on my tractor previously. I can’t even figure out what wheels they are. Thanks for the help tho.

 

[Barleymow]

Have brocks any

 

[Nearly]

TS115 wheels. I have one on 8340.

Anything on agrisparestrading.co.uk

Agrispares Trading Co Ltd

www.agrisparestrading.co.uk

 

[bravheart]

Not sure about the dish but the rim should have a makers name on it somewhere. Find it then match up the dish

 

[Nearly]

TS115 rim

 

[glasshouse]

Hi. Wondered if anyone could help me out. I damage one of the centre dishes on my 2006 case mxu115 xline. 38inch rims. But am struggling to find a replacement. Was in touch with case but they think that the rims wer changed. The hole in the centre of the dish is 140mm and the distance from nut to nut is 205mm. The distance on the holes that bolt to the rim are 140mm but the new centre I was goin to get was only 80mm. Thanks.

I have a set of ford 6640 wheels
38 inch

 

[Nooie]

I have a set of ford 6640 wheels
38 inch

Have you got a photo of them?

 

[Nooie]

View attachment 1035073
TS115 rim

That’s the one am looking for

 

[Nooie]

View attachment 1035073
TS115 rim

Any idea wer I could buy one either second hand or new?

 

[glasshouse]

Have you got a photo of them?

 

[Nooie]

View attachment 1035073
TS115 rim

Can’t seem to find this centre anywhere. Most of the centres I have come across are 80mm between the bolts that bolt to the rim. The centre in this photo is 140mm, which is the one I need.

 

[Nearly]

Ring round the Ford NH breakers.

Get onto the NH partstore website and get the part number for the ts115 wheel centre.
NH don't make their own wheels. Coukd be GKN Sankey or similar.

People making dual wheels and specialist rims will be able to make you one at a cost.
A normal centre will fit IF you mag drill the second holes in the right place. Bit rough though.

Where in the country are you?

I have an odd pair on my tractor but would only want to sell centre and rim. I'd need to find another Ford one.

 

[Nooie]

Ring round the Ford NH breakers.

Get onto the NH partstore website and get the part number for the ts115 wheel centre.
NH don't make their own wheels. Coukd be GKN Sankey or similar.

People making dual wheels and specialist rims will be able to make you one at a cost.
A normal centre will fit IF you mag drill the second holes in the right place. Bit rough though.

Where in the country are you?

I have an odd pair on my tractor but would only want to sell centre and rim. I'd need to find another Ford one.

i stay on south uist, in the western isles. An island of the west coast of Scotland. Will if you are selling give me a shout. I did get a mxu 115 case centre and I tried the centre on the wheel but the holes wudnt match up.

 

[glasshouse]

Hi. Wondered if anyone could help me out. I damage one of the centre dishes on my 2006 case mxu115 xline. 38inch rims. But am struggling to find a replacement. Was in touch with case but they think that the rims wer changed. The hole in the centre of the dish is 140mm and the distance from nut to nut is 205mm. The distance on the holes that bolt to the rim are 140mm but the new centre I was goin to get was only 80mm. Thanks.

What did u do to dish?

 

[Nearly]

A good welder will weld a new centre into your dish, or whatever it needs.
Unless it has folded and knackered.

 

[Nooie]

What did u do to dish?

Almost rolled the tractor at full speed. Tractor went on two wheels and I must have bent the centre when that happened. A bottle of water had rolled underneath the brake peddle while the hand throttle was on full. Close one.

 

[Nearly]

Ouch. Did similar on a Ford 6600 round a bend. Managed 4 big black left and right curves before I got it settled again.
It didn't only happen to Fendts at 55k.

 

[glasshouse]

Hi. Wondered if anyone could help me out. I damage one of the centre dishes on my 2006 case mxu115 xline. 38inch rims. But am struggling to find a replacement. Was in touch with case but they think that the rims wer changed. The hole in the centre of the dish is 140mm and the distance from nut to nut is 205mm. The distance on the holes that bolt to the rim are 140mm but the new centre I was goin to get was only 80mm. Thanks.

You need a mag drill and drill four new holes in rim
Bolt thr new rim on with just four bolts and drill the holes where needed
Easy peasy