200l/ha liquid fert nozzles

[Beefsmith]

Any suggestions for a nozzle that is good for 200l at 3 bar and 10km/hr. Currently running Teejet StreamJet 7 for 300-350l/ha but I need a different size for 200l and they are £10-14 each depending on seller.
This is a bit of a one off some I’m wanting something cheaper ideally.

 

[holmes65]

Could you add water to the fert and put on a higher volume of more dilute fert, assuming that its only a small job you want them for.

 

[Ferndale213]

Brown hypro esi

 

[faircomment]

3 bar is somewhat keen for fertiliser . Can you not just drop the pressure to achieve what you need. I will run at 1-1.5 bar whenever possible.

 

[Renaultman]

@teslacoils has some dribble bars for sale, I'm assuming they are the adjustable ones so should do your job

 

[DieselRob]

Any suggestions for a nozzle that is good for 200l at 3 bar and 10km/hr. Currently running Teejet StreamJet 7 for 300-350l/ha but I need a different size for 200l and they are £10-14 each depending on seller.
This is a bit of a one off some I’m wanting something cheaper ideally.

What colour nozzles are you on at the moment? I use white 08s to do between 180 and 375l/ha. 3 bar should be your max pressure on liquid fert, no problem to run as low as 1bar if required

 

[teslacoils]

@teslacoils has some dribble bars for sale, I'm assuming they are the adjustable ones so should do your job

Set of these any good? No use to me any more.

 

[teslacoils]

I put 190lt/ha on at 1.5 bar with the "slider" on number two at 9k. And 350lt/ha with the slider at 4, and similar pressure and speed. Was pretty easy.

 

[Renaultman]

I put 190lt/ha on at 1.5 bar with the "slider" on number two at 9k. And 350lt/ha with the slider at 4, and similar pressure and speed. Was pretty easy.

They look like a green version of my yellow chafer ones. Can get down to 100l/ha on setting one.

 

[teslacoils]

At setting 1, 10k and one bar, you get 100lt/ha.

Setting 6, 10k and two bar, you get about 850lt/ha

 

[teslacoils]

They look like a green version of my yellow chafer ones. Can get down to 100l/ha on setting one.

Yes, I got them from chafers. They're just down the road from me.

 

[ZXR17]

What colour nozzles are you on at the moment? I use white 08s to do between 180 and 375l/ha. 3 bar should be your max pressure on liquid fert, no problem to run as low as 1bar if required

 

[Billboy1]

are they grey coloured if so thats what i use for 200l/ha just less pressure ?