5` x3` ATV Sheep trailer

[idgni]

Yes, but what make is it please?

Looks very like mine ,
MCM trailer ,

 

[FE35]

Swaledale here very well built with a proper cast type swivel hitch. Bearings go for fun whatever make but they’re easy changed. I traded mine with bald tyres, worn bearings & a bent stub axle for only 200 to swap for brand new[emoji1417] cheaper than the bits to fix up the old!

 

[Hooby Farmer]

Looks very like mine ,
MCM trailer ,

View attachment 760522

Aye very similar. I used to make them for Davy, but I do my mudguards better

 

[whindy]

I have just ordered the swaledale 6 ewe lambing trailer. We have had 5x3 one for 20 years well made kit still good condition

 

[pritch]

Not a brand as such yet, I make them.

Good evening, do still make the lambing trailers?

 

[Diggerdinsdale]

I've just made some lamb boxes for a local guy to put on the side of his new trailer.

 

[Farmer_Joe]

got a graham Edwards, 5 ft by 3 foot with 2 gates, the internal gate can be moved to 3 positions, so can hold a hog at front, can go in the middle (move 2 sets of ewes with lambs) and near back,

they have even made one dowl on the hinge longer so its easy to move the internal gate

Best £650 ive ever spent, every year i use it think how bloody good it is!

 

[Highland Mule]

got a graham Edwards, 5 ft by 3 foot with 2 gates, the internal gate can be moved to 3 positions, so can hold a hog at front, can go in the middle (move 2 sets of ewes with lambs) and near back,

they have even made one dowl on the hinge longer so its easy to move the internal gate

Best £650 ive ever spent, every year i use it think how bloody good it is!

Agreed, but wouldn’t it be even better if the internal gate was hinged on the opposite side to the external one? That way you could use it in the rear position as a loading gate, complimentary to the back gate.

 

[Poorbuthappy]

Funny. I did a search for this thread earlier and didn't find it. Thanks for its revival