650 lexion unloader drive chain.

[Right-arm fast]

Wanted to take the chain off to check it for wear but the ops book just refers to tensioning. Am I missing something, I Thought the three augers needed timing when putting a chain on but cant see where it tells you to do it in the book.

Thanks for any pointers. cheers

 

[Mr Wendal]

I couldn't find it in the book either, claas dealer sent this. Hopefully you can see it ok. Think basically one cross auger want to be delivering onto start of main auger flighting, then the second one as the main rotates to face it.

 

[Right-arm fast]

I couldn't find it in the book either, claas dealer sent this. Hopefully you can see it ok. Think basically one cross auger want to be delivering onto start of main auger flighting, then the second one as the main rotates to face it.

Thanks Mr Wendal, thats great! Why its not in the book i dont know, it was with our 460.

 

[Mr Wendal]

Same with old 550 but not in 660 book.

 

[lexion780tt]

Just put some marks on the sprocket before you take the chain off will be glad of them if chain snaps with a full tank won't have to take panels off to time it

 

[DieselRob]

Our 630 has been marked from new. Whether the factory or dealer did it I’m not sure