750a fert tubes

Discussion in 'Direct Drilling Machinery' started by Clive, Jun 20, 2016.

  1. Clive

    Clive Staff Member

    Location:
    Lichfield
    I've had various pm's emails and twitter messages about them over the last 6 months or so but frankly lost track of them all !

    I'm about to have a couple offsets made - if anyone wants some to my now proven (4th attempt !) design let me know asap and I can add you to the order
     
  2. BSH

    BSH Member

    Location:
    Romsey, Hampshire
    Clive, Could I express an interest please. What sort of price are you expecting?
     
  3. Northdowns Martin

    Location:
    Snodland kent
    Hi Clive, how much further fabricating is required to fit them or are they a bolt on finished item?
     
  4. Clive

    Clive Staff Member

    Location:
    Lichfield
    bolt on, last ones I had made were perfect shape / route etc but used cable ties to hold them in place, now have a tab brazed to the tube so they bolt to the coulter which should allow no movement
     
  5. AF Salers

    AF Salers Member

    Location:
    York, UK
    Have you a price yet Clive?
    thank you
     
  6. Clive

    Clive Staff Member

    Location:
    Lichfield
    image.jpeg image.jpeg image.jpeg Test fitted the bolted tab version before fabricator make the test for those that have ordered - much better than the previous cable tie fixing



    Also for those that have asked this is the check valve we use Inline just above the stainless pipe (top pic)

    Stainless tube is 6mm

    price is £18 each - I have a big batch being done this week ready form next friday I'm told. If anyone else wants some I can probably get a few more added to that order
     
    Last edited: Jul 5, 2016
    Farmer Roy, 155tm and part timer like this.
  7. Clive

    Clive Staff Member

    Location:
    Lichfield
    just bolt straight on, only thing you have to modify is to cut the corner off the plastic seed tab
     
  8. marco

    marco Member

    Location:
    tipperary, ireland
  9. Louis Mc

    Louis Mc Member

    Location:
    Meath, Ireland
    How are the pipes progressing?
     
  10. neyorks

    neyorks New Member

    Clive
    I have just bought a 4m, 750a and am looking for some fert tubes like yours,
    Have you any available and how much?

    neyorks
     
    Clive likes this.
  11. Northdowns Martin

    Location:
    Snodland kent
    Clive and neyorks like this.
  12. neyorks

    neyorks New Member

    Thanks for info, ordered now.
     
    Northdowns Martin and Clive like this.

Share This Page