Farmer Bill
Member
- Location
- Dorset
Lots of different kits available firm called longranger 4x4 was in the farmers weekly apparently
Seems discovery 2s can be picked up quite cheap
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The chassis bend without the drain hole is just in front of the back axle.Are the fronts of the bodies not always rotten too?
you rangWhy would you remove half of the bit that doesn't rust, to expose more of the elements to the bit that does rust?
@TripleSix
@roscoe erf
Billy no mates
I'll just have to reduce my number of friends by 2.
Soon be in negative numbers.Billy no mates
Lots of different kits available firm called longranger 4x4 was in the farmers weekly apparently
Seems discovery 2s can be picked up quite cheap
Christ how bigs your steak I know your Fred flintstoneThat thing looks lethal to me in a T bone accident..
Please tell me you cut that ply with the angle grinder you will be immortalised I the bodgers thread if you did
I'll just have to reduce my number of friends by 2.
Tempting as it may be to have such an honour I have to admit to using a handheld circular saw with fine teeth and an actual tape measure, a straight edge and a pencil.Please tell me you cut that ply with the angle grinder you will be immortalised I the bodgers thread if you did
NeatTempting as it may be to have such an honour I have to admit to using a handheld circular saw with fine teeth and an actual tape measure, a straight edge and a pencil.
The grinder has a flap disk in for finishing the edges.
I have been looking at one of these though.
Make sure it comes with a 22mm bore, not 14. Pain in the arse making it fit. They're great though.Tempting as it may be to have such an honour I have to admit to using a handheld circular saw with fine teeth and an actual tape measure, a straight edge and a pencil.
The grinder has a flap disk in for finishing the edges.
I have been looking at one of these though.
Ideal for trimming the ends off fencing rails etc.