Anyone used Agripartsdirect.com?

[Phil P]

Anyone one used them? No phone numbers on website so want to make sure they’re ok to deal with before a spend a couple of k£!
Thank in advance
Phil P

 

[cosmiccrofter]

Having had a look at the accounts filed with Companies House (incidently prepared by someone with no knowledge of compliance requirements) I would think they should be best avoided.

 

[Clive]

Anyone one used them? No phone numbers on website so want to make sure they’re ok to deal with before a spend a couple of k£!
Thank in advance
Phil P

what are yo after ? is there not a TFF marketplace vendor that sells it ? wee vet the vendors on FMP so know they are all good

 

[seedman stains]

Who is AG tractors? the company at the end

 

[cosmiccrofter]

Who is AG tractors? the company at the end

 

[Phil P]

what are yo after ? is there not a TFF marketplace vendor that sells it ? wee vet the vendors on FMP so know they are all good

Can’t find parts on FMP I’ve looked, I’m looking for a heavy duty wobble box output shaft (or a wobble box failing that) and knife drive arm. Claas 7.5m contour header.

Genuine are silly money and John Manners is out of stock.

 

[Clive]

Can’t find parts on FMP I’ve looked, I’m looking for a heavy duty wobble box output shaft (or a wobble box failing that) and knife drive arm. Claas 7.5m contour header.

Genuine are silly money and John Manners is out of stock.

do you have a part number ? I will ask the guys in the office to see what they can find, there are combine suppliers vendors on FMP but not all their stock is always listed

 

[Bramble]

JMT Engineering??

 

[Phil P]

do you have a part number ? I will ask the guys in the office to see what they can find, there are combine suppliers vendors on FMP but not all their stock is always listed

Just out the yard, but I’ll get part numbers when I land back ?

 

[Phil P]

do you have a part number ? I will ask the guys in the office to see what they can find, there are combine suppliers vendors on FMP but not all their stock is always listed

That’s the wobble box part number, ideally I just want the output shaft though rather than having to swap the whole gearbox.

 

[Western promise]

Try Morris Corfield Broseley ask for Chris 01952881000

 

[Phil P]

Try Morris Corfield Broseley ask for Chris 01952881000

I already deal with Morris Corfield 2.5k for a new box and £300 for the arm. Shaft is £850 on it’s own.

 

[Phil P]

@Clive i need no26 part no - 669 915.1 and no45 part no - 626 631.0

Thanks

 

[Steevo]

Have you tried APH?

 

[Phil P]

Have you tried APH?

No, I’ll give them a call see if they have anything.
Thanks.

 

[Phil P]

Have you tried APH?

Sorted ? thanks @Steevo

 

[Steevo]

Sorted ? thanks @Steevo

You're welcome. They're always my first port of call for parts - sensible prices and almost always have stock. Can't say either for a dealer.

 

[Phil P]

You're welcome. They're always my first port of call for parts - sensible prices and almost always have stock. Can't say either for a dealer.

Just needed to order the yoke but will work out cheaper for the yoke, arm and all the seals than just the yoke on it’s own from dealer.