auger flights

[JohnDeere8530]

I am after some 6 inch flight, ideally just rolled and not the centre shaft. Does anyone know of any flight manufacturers or stockists? It is for an age old brice baker transmatic type 40ft auger

 

[yellow belly]

astwell

 

[james ds]

I am after some 6 inch flight, ideally just rolled and not the centre shaft. Does anyone know of any flight manufacturers or stockists? It is for an age old brice baker transmatic type 40ft auger

Rotospirial in Ireland make every size .

 

[Tim G]

West Engineering in Ipswich (if your not in a great hurry!)

 

[sjt01]

Astwell have always been very helpful to us, for both stainless on the digester and mild steel on the combine unloading auger. [email protected]

 

[Bald Rick]

Rotospirial in Ireland make every size .

They have a depot in Queensferry near Chester.
Rebuilt the spirals of our feeder wagon this winter. Very good

 

[geoff570]

I am after some 6 inch flight, ideally just rolled and not the centre shaft. Does anyone know of any flight manufacturers or stockists? It is for an age old brice baker transmatic type 40ft auger

JMT Enginering Ladbrook

 

[ED.D]

They have a depot in Queensferry near Chester.
Rebuilt the spirals of our feeder wagon this winter. Very good

Have used these guys and they were very helpful. Highly recommended.

 

[MF565]

We have used these recently for some auger flights for us to weld on and were pretty quick turn around, ordered monday delivered thursday and seemed pain free enough according to the boss.

 

[Exfarmer]

Just make sure the spiral is the same hand. Believe it or not managed to weld some left hand to a tight hand. Did not lift well at all

 

[sjt01]

Just make sure the spiral is the same hand. Believe it or not managed to weld some left hand to a tight hand. Did not lift well at all

I generally email a photo to ensure we are talking the same handedness