Autosteer Newbie

[Orionn4444]

We have recently moved onto RTX centerpoint on a case Maxxum with a 372 receiver through the AFS 700 screen on the tractor.

I've previously used John Deeres Green Star but I have never owned or set up my own equipment.

Looking to find out how to set up the offsets etc for the likes of a seeder (if it needs one) front and rear mowers and a plough (not required but always handy)

Also if there's any tips/tricks or helpful hints I'd be glad of them, managed to do so much so far but really want to use it to its full potential.

 

[Chae1]

If you want to use it to full potential, map all fields and drive headlands too. Then when you go back to field drop implement and go. Have you implements stored?

 

[tr250]

If you want to use it to full potential, map all fields and drive headlands too. Then when you go back to field drop implement and go. Have you implements stored?

Can you do this without an rtk subscription

 

[Chae1]

Can you do this without an rtk subscription

Unsure, we did it on centrepoint last year. Changed to rtk this season.

 

[Orionn4444]

If you want to use it to full potential, map all fields and drive headlands too. Then when you go back to field drop implement and go. Have you implements stored?

Have been mapping field boundaries as I get around them and creating headlands from that boundary. Have also been setting up and storing implements as I've been using them, very handy saving the Headland management system for each individual implement, makes thr job far easier

 

[Chae1]

Have been mapping field boundaries as I get around them and creating headlands from that boundary. Have also been setting up and storing implements as I've been using them, very handy saving the Headland management system for each individual implement, makes thr job far easier

Sounds like your getting on fine.

I don't put in a offset for ploughing and it works fine.