B275 Grease Nipples/Points

[Vexis]

Hi, Does any one have an original service book which shows all the grease points and nipples for regular servicing ? (Including all the hidden ones ,long since forgotten ). I keep mine greased regular, but can't find any info as to where they all are, from the factory .

 

[Mur Huwcun]

Front axle pivot, king pins, clutch shaft(which needs next to nothing) brake pedal pivot shaft and levelling box.

 

[Flatlander]

Front axle pivot, king pins, clutch shaft(which needs next to nothing) brake pedal pivot shaft and levelling box.

Thought the steering joints had grease nipples too.

 

[Pennine Ploughing]

Thought the steering joints had grease nipples too.

They do, and many also grease nipple on water pump, 1 shot once a year,
Drop arms have them to,

Oil can for the brake linkages and hand brake,
mudguards are better oiled with oil can down the supports

 

[Vexis]

I have so far found 1x each King pin,,,,1 centre of front Axle,,,,1 x clutch pivot shaft,,,,,4 x on Brake pivot shaft and 1x on the brake diff lock Pedal..
Brake lever shaft nipples solid full of hard grease ,,blow lamp out next to see if it melts away or softens .

 

[Flatlander]

I have so far found 1x each King pin,,,,1 centre of front Axle,,,,1 x clutch pivot shaft,,,,,4 x on Brake pivot shaft and 1x on the brake diff lock Pedal..
Brake lever shaft nipples solid full of hard grease ,,blow lamp out next to see if it melts away or softens .

Blue lamp will soften the spring in the nipple and ruin it. Remove the nipple and dig the crap out. Fill with wd40 and put a new nipple in and leave it for a day then try greasing it. Rarely dried grease if most likely dust and rust sealing the hole where the grease is supposed to go.

 

[Vexis]

2 x clutch pivot shaft one each end