Backhoe wear

[Driver]

What is worn in this massey 860 backhoe for this to move back and forward. The rest of the machine has had new pins and bushings everywhere and this seems to be the only place with a bit of wear.

 

[Driver]

Damn the file is too big to upload as its a video I took.
It's basically the king pin I think in the back of it.

 

[Driver]

It's the pin below the two rams in the centre that seems to have some wear in it.

Is there a pin and bushing in this or what?

 

[fermerboy]

Not sure on the 860 but seem to remember there was a bearing in there on the old 450s that were on 60hx, etc.

 

[Driver]

Not sure on the 860 but seem to remember there was a bearing in there on the old 450s that were on 60hx, etc.

A bearing sounds unusual to have in there?

 

[rob h]

Our 50hx has a taper roller bearing at the bottom.

 

[fermerboy]

A bearing sounds unusual to have in there?

Our 50hx has a taper roller bearing at the bottom.

That's what I thought, been a while though.