Bateman floatation tyre

[norfolk'n'good]

Bateman rb16 floatation tyre or complete wheel required. 600/55 r26.5

 

[Cowslip]

Try burden bros website in kent, loads of tyres and wheels, and good to deal with.

 

[Bob lincs]

Also try Colin Simms at Sutterton he may have one .
07831 805080

 

[s~~t shoveller]

Have a set of 680 26.5s here I could sell...

 

[norfolk'n'good]

Have a set of 680 26.5s here I could sell...

Tyres and rims? Any pictures. PM me if you like. Thanks

 

[Badshot]

Be careful of 680's, Bateman told us it'd kill the wheel motors.

I thought my rb16 was on 580's.

 

[s~~t shoveller]

Be careful of 680's, Bateman told us it'd kill the wheel motors.

I thought my rb16 was on 580's.

I hope not cause were using 800s on ours!

 

[Badshot]

I hope not cause were using 800s on ours!

We saw some 710's for sale, checked with them to see if they'd be ok.
Response was on a 15/16 the motors aren't man enough. On a 25/35 they'd be ok.
Just repeating what we were told.
I'd recommend a call, just to see what they say.
800's must make it very wide.

 

[s~~t shoveller]

Ok..I will have to hope they're ok as not going to change unless it causes problems..yep it's wide but floats well...it came to us on 680 s.

 

[Woolless]

Try burden bros website in kent, loads of tyres and wheels, and good to deal with.

I had a look at their website, it was long on flashy JD stuff and short on second-hand wheels?

 

[Cowslip]

Hi search burden bros machinery, then used machinery section scroll down to tyres and wheels at the bottom of the page.

 

[Cowslip]

Just looked for you and couldn't see any that exact size, plenty close though. Also looked on brocks wheels and tyres couldn't see any on their site either.