Box section inserts

[steveR]

I have a load of 75mm box section steel, galvanised and then powder coated.

I have a project in mind, but do not want to weld so as to preserve the protection. I am sure I have seen hollow steel inserts for giving 90 degree angles and also a 90 + 90 for a corner piece and upstand for creating a box shape.

Can't find anything on line, and wondered if anyone has seen something suitable? The idea is to use a bolt (or rivets) to hold the steel all together.... if feasible.

 

[steveR]

Like these, but in steel! 2nd row on RHS .

 

[B R C]

I’ve not seen anything like it for 75mm, would also have to match your wall thickness. You may have to think of an alternative method I fear.

 

[steveR]

I’ve not seen anything like it for 75mm, would also have to match your wall thickness. You may have to think of an alternative method I fear.

Yes. I am pondering overlap connections or similiar.

I want to make a livestock transport box, so I have a bit of flexibilty in teh build is possible

 

[mobileweld]

Key clamps available for smaller box but not sure if any for 75mm

 

[steveR]

Key clamps available for smaller box but not sure if any for 75mm

Cheers, they look very interesting indeed. Now I know what they are called, I can do some more looking

 

[tomlad]

I bet f h brundel will have something

 

[tomlad]

Newton-le-Willows

Contact Details for F H Brundle's Newton-Le-Willows Branch - Wrought Iron and Steel Stockists

www.fhbrundle.co.uk