bucket grab/ waste handling bucket

[trook135]

looking at a bucket grab type attachment to go on the loader tractor, got quotes from local dealerships for Quicke and Mx but they only want to sell the grabs with Kverneland type tines so had a look online and found this Has anyone got any experience with 'machinery sales EU' seems to look quite the decent product, mainly will be used for clearing up out in the yard/ field moving logs/brushwood so wanted the stronger type grab, will mention that this company are nearly £600 cheaper than Quicke or MX for a 6ft grab

http://www.machinerysaleseu.co.uk/grab-bucket-h-1200mm-4

 

[itsintheblood]

I started a similar thread a few weeks ago , the thing that swayed me was the weight of the bucket grab as most are made for handlers and not tractors , also other forum member has one and finds it difficult to pick up brash , bought a x form grab and a cherry bucket for similar money as one bucket grab

 

[james ds]

I seen this company at a show this week and they make very strong bucket grabs and the prices they gave me were very good , www.rohanengineering.ie

 

[fergie35]

@trook135 There is only one bucket grab. I'm sure @CherryDan won't mind me borrowing this image.

 

[trook135]

looks fairly big!! any ideas on costings?

 

[itsintheblood]

I think a 8ft is about £2300 + vat and think they are around 800 kilos

http://thefarmingforum.co.uk/index.php?threads/Manure-bucket-or-grab.96212/

 

[Boysground]

I have a cherry bucket grab for a manitou. It is very useful but as has been said it is heavy.

Bg

 

[trook135]

Few too many pennies for me just for a grab on the loader tractor!! Too big for my loader tractor too, need about a 6ft max width for manoeuvrability

Just spoken to machinery sales EU and theirs weighs approx 390kilos which doesn't seem too terrible! And at £1450 seems too good ??

 

[fergie35]

Few too many pennies for me just for a grab on the loader tractor!! Too big for my loader tractor too, need about a 6ft max width for manoeuvrability

Just spoken to machinery sales EU and theirs weighs approx 390kilos which doesn't seem too terrible! And at £1450 seems too good ??

The one I posted above is for a telehandler, sorry I wasn't reading your original post properly. I'm sure Dan from Cherry can fill you in when he see's this.

 

[CherryDan]

Hi there, thanks for the heads up @fergie35

The X-Form multi bucket has had very good results so far and, although designed for loadalls, we have done a few for higher capacity loaders and feedback has been good. It is a fair old lump though.

We do a smaller bucket grab specifically for the JCB Teletruk which could be modified. That would be slightly leas weight but still the best part of 500kgs

Dan

 

[L P]

Hi there, thanks for the heads up @fergie35

The X-Form multi bucket has had very good results so far and, although designed for loadalls, we have done a few for higher capacity loaders and feedback has been good. It is a fair old lump though.

We do a smaller bucket grab specifically for the JCB Teletruk which could be modified. That would be slightly leas weight but still the best part of 500kgs

Dan

Dan, do you deal direct or is it all through dealers? Regards George

 

[CherryDan]

Hi George, we sell through dealers. Do you want me to pm me your location and I can get a rep from a local dealer to call you with some price?

Regards
Dan

 

[L P]

Hi George, we sell through dealers. Do you want me to pm me your location and I can get a rep from a local dealer to call you with some price?

Regards
Dan

Thanks, local rep is Mark Denton or Richard Gaylard, I will have a chat with them. Was after a few bits as just changed handler and am thinking of replacing lots of old pin and cone bits for a few good new ones. Do you do manitou to euro adapters?

 

[CherryDan]

We do yes, might have one in stock actually. Will check first thing Monday morning. Dan

 

[L P]

We do yes, might have one in stock actually. Will check first thing Monday morning. Dan

Many thanks

 

[L P]

While you're at it would need 2 tonne grain bucket, nodding donkey bale squeeze, and big bale grab.... All shop soiled, nearly free and with manitou brackets of course

 

[ACEngineering]

While you're at it would need 2 tonne grain bucket, nodding donkey bale squeeze, and big bale grab.... All shop soiled, nearly free and with manitou brackets of course

be a nice order for some one

 

[L P]

be a nice order for some one

Welcome to quote on the bucket!

 

[CherryDan]

Hi @Lord Peasemore

Just checked, unfortunately we haven't got one in stock at the moment. But we can certainly do them. lead time is approx 3-4 weeks

Dan

 

[beefboy]

http://www.evansandreid.co.uk/products/

you could try the above, have a large selection, will also make bespoke, very popular with farmers in S.Wales, reasonably priced and well made.