How are you going to "distort" the molecule? Not sure if you are getting the difference between a molecule and the matter that makes up the molecule? Anyway, the energy required to change the state varies between "a lot" to "enormous". The mechanism to change a movement to a crank is common as stated.
carbon free power. for you all
- Thread starter clarityjohn
- Start date
clarityjohn
Member
I
It is not gas or steam, it is the compression or expansion of the molecule of air. That distortion creates a force, which I have used to rotate a crankshaft. The force or torgue you need, is then installed into the two chambers. Thanks for your mail
It is not gas or steam, it is the compression or expansion of the molecule of air. That distortion creates a force, which I have used to rotate a crankshaft. The force or torgue you need, is then installed into the two chambers. Thanks for your mail
clarityjohn
Member
Compaction of the molecule is like that in your car tyre, expansion of the molecule is like a vacuum door closer. That is distortion of the molecule, thanks for your input.
clarityjohn
Member
Sorry could you explain that to me, fuel is solar ??
clarityjohn
Member
OK Thanks.
renewablejohn
Member
- Location
- lancs
Solar collected by high temperature solar vacuum tubes which heats up thermal oil which is passed through a thermal oil steam evaporator to produce steam at 150 PSI to turn conventional steam piston engines which generate electric 24/7. Simples.
clarityjohn
Member
Yes I understand that although a little confused, you are talking about a device. Which has no relevance to this design, I asked if you think this device would work. Solar tubes are not going to create, enough electrical generation to run you car or home. I only asked for an opinion on this, not bring into the equation the whole scientific world of other units. ???
I've got a plan to make some money, make a couple of video's with sketchy information and upload them to youtube. Include some parranoid cover up theories as to why no one else is doing this then spam some links around the web on various forums (non technical) full of the general public.
Sit back and watch my advertising revenue roll in, when it starts to dip make a new video about aliens visiting in the night.
write a book
profit.
Sit back and watch my advertising revenue roll in, when it starts to dip make a new video about aliens visiting in the night.
write a book
profit.
clarityjohn
Member
Read again it carbon free power, like I said I only asked for an opinion. As to whether it would work or not, you mail does not enlighten that. Perhaps you cannot answer the question set, if all question raised were answered with ridicule. Then the future for us all, is on a very limited basis.
clarityjohn
Member
So would the design work or not, that was the question. Where does it state anywhere in video making money, it is available to anyone to produce it and make money. Have you not realised that, its open to the public ?????? Its not hard to work that out is it ???
renewablejohn
Member
- Location
- lancs
You would need a pretty big home for each of my girls 300 kw.
Attachments
renewablejohn
Member
- Location
- lancs
Carbon free is not the Holy Grail both Iceland and Norway are virtually at that stage now. Another decade and a lot more countries will be in that position.
clarityjohn
Member
I do not dispute your statement, refering to Iceland and Norway. The original question from me, was have a look at my design and You Tell Me. Is what I have thought of possible, I sought the opinions of the many. I,E, would it work or would it not, comparison's to other working units was not that sought. I needed to hear from people, who had a constructive angle of questioning. So simple really when you think about it, yes or no would suffice. ??? If its a no on what grounds. Thanks for your input.
renewablejohn
Member
- Location
- lancs
Cannot really help then if you cant see the analogy of what your proposing is the same as a radial engine. If you accept the analogy then the answer is simple No and the explanation is easy because your system remains in balance due to your crankshaft. Just do the maths for a simple 3 cylinder radial engine to prove it. Radial engines work because you create an in balance of the system in sequence.
clarityjohn
Member
I have gone as far as I can, in the circle of people that I know. Who are just basically normal working people, the higher regions of intellect. Scientist, academics I don't mix with, so I wrote to the leaders. Just simply asking them to LOOK at it, that's all just look. I have no reply, so I put it on here. Thankfully people like yourself, have shown an interest. If I claimed to have re-invented the wheel, then I would be classified as a nutter. All I done is thought of this design, which I am hoping to get an answer. Both the professor and PHd, whom I asked just said " its possible ". Yet it goes against all our teachings, so they would not put themselves on the line. But they could not give me a reason, HOW IT WOULD NOT WORK. So that's the position I am in, I appreciate all comments. I only seek an answer. Thanks again.
clarityjohn
Member
The radial engine is totally different, yes your right it creates an inbalance. This device creates a continuum of movement, using two forces in opposite direction. You said its a simple " NO " Then please elaborate with out reference, to the radial engine ?? I await your input.
The problem is that due to energy losses you will not have a continuous force, never mind the intial requirement of energy to " kick start " the initial process.....this is why an external energy source is required. Consider a bicycle pump that you block the out let valve then compress the handle, what happens? Then consider if you joined another bicycle pump to that handle so the second pump compresses...again what happens? Please go and do some reading....in short unless you can change the basic laws of physics and are not talking on an atomic or subatomic scale then it won't work. You can convert another source of energy into a different type of energy but with losses...