Case 4230 pto

[Cooky]

Hi. I've snapped the dual speed pto shaft on the tractor . Case 4230. I'm having trouble removing the old shaft. Any help would be gratefully received. Thanks Mike

 

[essexpete]

Have you been in the side as well? @Gapples will be your man.

 

[trigger]

Hi. I've snapped the dual speed pto shaft on the tractor . Case 4230. I'm having trouble removing the old shaft. Any help would be gratefully received. Thanks Mike

Can’t remember but do you not have to drop the 4wd box off the bottom and knock a roll pin out or take a circlip off

 

[Netherfield]

Any help?

 

[Mur Huwcun]

Bottom shaft on the older ones you needed the side plate off to knock the spiral pin out of the pack to withdraw the shaft, be carefull of the sealing rings. Top shaft was another story but coukd be done with top cover in place. How the fual speed ones are I’m not sure though.

 

[little blue]

Rear cover off. 4wd drop box off. Remove roll pin and pull shaft out the back

 

[sc4545]

Is it a selectable pto?

 

[Cooky]

Is it a selectable pto?

Yes. 540/1000

 

[sc4545]

They can be tricky to get out. Loosing the cable off the selector remove all the bolts in the rear housing and also take off the top link bracket. It should come out then

 

[Cooky]

Any help?

Thank you

 

[Rilum as]

Im doing the same job.
but i cant get off the pto shift fork.
It is locked with a tension pin. I try to hammer it in but it stops after a bit.
any tips to how to get it off?

 

[Rilum as]

Im doing the same job.
but i cant get off the pto shift fork.
It is locked with a tension pin. I try to hammer it in but it stops after a bit.
any tips to how to get it off?