Case 5150 parts

[Steevo]

Need a hydraulic pipe for a 5150 but the dealer can’t get it any longer.

Anyone suggest where I could try?

My man in a van said he knew someone up north who advertised in Classic Tractor but couldn’t remember their name/details.

 

[JMM]

Case IH Tractor Parts and Tractors for Sale

Intatrac supplies Case IH Tractor Parts and refurbished second hand tractors - we have an extensive range of second hand and new. Call now on 01588 680217.

www.intatracuk.com

MDE agri parts

www.mdeagriparts.co.uk

 

[JMM]

I take it it's a steel, shaped pipe ?

 

[milkloss]

Very often we will replace with a regular hydraulic hose. Appreciate that isn’t always possible though.

 

[Steevo]

I take it it's a steel, shaped pipe ?

Part steel, part standard rubber hydraulic hose.

 

[serf]

Had stuff off intatrack , got loads of stuff in stock and second hand bits too

 

[serf]

Part steel, part standard rubber hydraulic hose.

That sentence reminds me of this

 

[Steevo]

Never seen a pipe quite like it before - half of one, half of another. The crimp joint in the middle swivels which I don't think it is supposed to and so I think is the cause of weeping oil.

 

[little blue]

Looks like a steering hydraulic pipe

 

[Mur Huwcun]

Never seen a pipe quite like it before - half of one, half of another. The crimp joint in the middle swivels which I don't think it is supposed to and so I think is the cause of weeping oil.
View attachment 1170635

crimp is loose if it’s swivelling. Looks like two piece fittings. Cut the ferrules off and re use the fittings or cut the steel part and drill a blanking plug to fit over and braze it on to then take a flexi part

 

[Daveh]

The last hose that i had leaking like that , the local hydraulic firm i use cut the steel end off and fitted a compression fitting. That was quite a few years ago and its still okay.

 

[e3120]

alert: ask your tame hydraulic man to give that fitting a fresh clinch and see how it goes.

 

[ACEngineering]

Never seen a pipe quite like it before - half of one, half of another. The crimp joint in the middle swivels which I don't think it is supposed to and so I think is the cause of weeping oil.
View attachment 1170635

unless this is a critical pipe say for lift arms, i would in this case cut the crimps off and reuse the ends. if its something like a steering pipe the pressure in it will be alot lower anyway when compaired to a main hyd service. steering circuits often 120 to 160 bar where as main pressure 210 to 250bar or on alot of manitou's would be 270bar which soon weeds out the weak hoses!