Jim G
Member
- Location
- Staffordshire
Hi all, I'm after a bit of assistance if anyone can help. I've got a Case 5150 that won't start.
The dash lights up like normal when the key is turned to the running position, and they go off when turned to the start position like it should, but isn't starting the tractor. I've shorted the terminals on the starter coil, and tractor starts. I've followed back to another relay which pulls the starter in, and ignition is not bringing that in. I've disconnected the coil wires and connected up to tester, but not reading anything.
Where should I go from there? I know the shuttle has to be in neutral (which it appears to be). Just after a bit of advice before getting the dash open.
Thanks
The dash lights up like normal when the key is turned to the running position, and they go off when turned to the start position like it should, but isn't starting the tractor. I've shorted the terminals on the starter coil, and tractor starts. I've followed back to another relay which pulls the starter in, and ignition is not bringing that in. I've disconnected the coil wires and connected up to tester, but not reading anything.
Where should I go from there? I know the shuttle has to be in neutral (which it appears to be). Just after a bit of advice before getting the dash open.
Thanks